Water Pump - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Show/hide table
| |
| Illustration 1 | g06268019 |
Show/hide table
| |
| Illustration 2 | g06268021 |
Show/hide table
| |
| Illustration 3 | g06268022 |
- Install the water pump in the reverse order of removal.
Show/hide table
| |
| Illustration 4 | g06268023 |
|
Tightening sequence for the bolts. | |
Show/hide table
| |
| Illustration 5 | g06268025 |
Caterpillar Information System:
797F Off-Highway Truck Engine Oil - Change
C175 Tier 4 Final Engines for Off-Highway Trucks Crankcase Pressure Is High
C7.1 Marine Propulsion Engine Fuel Injection Pump Gear - Install
C7.1 Marine Propulsion Engine Fuel Injection Pump Gear - Remove
The Temperature Variable Control May Fail on Certain 773G, 775G, and 777G Off-Highway Trucks {7309, 7343} The Temperature Variable Control May Fail on Certain 773G, 775G, and 777G Off-Highway Trucks {7309, 7343}
3412C Generator Set Voltage Connections
A New Limit Switch is Now Available for Certain C280 Engines {1408, 1435} A New Limit Switch is Now Available for Certain C280 Engines {1408, 1435}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Work Tool Control
C7.1 Marine Propulsion Engine Fuel Injection Pump - Remove and Install
C11 and C13 Engines Turbocharger
3412C Generator Set Generator Operation
3412C Generator Sets Generator Lead Connections
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Maintenance Interval Schedule
C7.1 Marine Propulsion Engine Water Temperature Regulator - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Adjustable Gauge Undercarriage Frame
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting and Tying Down the Machine
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Access Door and Cover Locations
3412C Generator Set Fuel System Secondary Filter - Replace
C7.1 Marine Propulsion Engine Vibration Damper and Pulley - Remove and Install
3412C Generator Sets Refill Capacities
3412C Generator Sets Fluid Recommendations
3412C Generator Set Product Lifting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Service Interval Chart
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators System Pressure Release