Refill Capacities
The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require more oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. Refer to the Operation and Maintenance Manual, "Maintenance Section" for more information on Lubricant Specifications.
Show/hide table
| C0.5 Engine Engine
Refill Capacities |
||
|---|---|---|
| Compartment or System | Minimum | Maximum |
| Crankcase Oil Sump(1) | |
|
| Total Lubrication System(2) | ||
Show/hide table
| (1) | These values are the approximate capacities for the crankcase oil sump which includes the standard factory installed oil filters. Engines with auxiliary oil filters will require more oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
| (2) | The Total Lubrication System includes the capacity for the Crankcase Oil Sump plus the capacity of factory installed oil filters and other filters added to the lubrication system. Enter the value for the capacity of the Total Lubrication System in this row. |
Show/hide table
| C0.7 Engine Engine
Refill Capacities |
||
|---|---|---|
| Compartment or System | Minimum | Maximum |
| Crankcase Oil Sump(1) | |
|
| Total Lubrication System(2) | ||
Show/hide table
| (1) | These values are the approximate capacities for the crankcase oil sump which includes the standard factory installed oil filters. Engines with auxiliary oil filters will require more oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
| (2) | The Total Lubrication System includes the capacity for the Crankcase Oil Sump plus the capacity of factory installed oil filters and other filters added to the lubrication system. Enter the value for the capacity of the Total Lubrication System in this row. |
To maintain the cooling system, the Total Cooling System capacity must be known. The approximate capacity is for the engine cooling system. External System capacities will vary among applications. Refer to the OEM specifications for the External System capacity. This capacity information will be needed to determine the amount of coolant that is required for the Total Cooling System.
Show/hide table
| C0.5 Engine Engine
Refill Capacities |
||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Engine Only | 1.1 | 1.2 |
| External System Per OEM(1) | ||
| Total Cooling System(2) | ||
Show/hide table
| (1) | The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Refer to the OEM specifications. Enter the value for the capacity of the External System in this row. |
| (2) | The Total Cooling System capacity includes the capacity of the Engine plus the External System. Enter the value for the capacity of the Total Cooling System in this row. |
Show/hide table
| C0.7 Engine Engine
Refill Capacities |
||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Engine Only | 1.2 | 1.3 |
| External System Per OEM(1) | ||
| Total Cooling System(2) | ||
Show/hide table
| (1) | The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Refer to the OEM specifications. Enter the value for the capacity of the External System in this row. |
| (2) | The Total Cooling System capacity includes the capacity of the Engine plus the External System. Enter the value for the capacity of the Total Cooling System in this row. |
Caterpillar Information System:
120 and 120 AWD Motor Grader Maintenance Interval Schedule
C0.5 and C0.7 Industrial Engines Stopping the Engine
C0.5 and C0.7 Industrial Engines Starting the Engine
3512E Engines Fuel Control Valve - Remove and Install - Primary
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713} Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620} New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620}
C0.5 and C0.7 Industrial Engines Diagnostic Flash Code Retrieval
C0.5 and C0.7 Industrial Engines Overspeed
C0.5 and C0.7 Industrial Engines Gauges and Indicators
C0.5 and C0.7 Industrial Engines Emissions Certification Film
320GC and 320 Excavator Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Temperature Sensor - Brake Cooling Oil and Hydraulic Tank
New Water Temperature Regulators Available {1355} New Water Temperature Regulators Available {1355}
C9.3B Engines for Caterpillar Built Machines Camshaft - Remove
G3500H Generator Set Engine Fuel Differential Pressure Is Low
320 GC, 320 and 323 Excavator Machine Systems Joystick and Pedal - Calibrate
320GC, 320 and 323 Excavators Machine Systems Boom Bearings and Seals - Remove and Install
C0.5 and C0.7 Industrial Engines Monitoring System
C0.5 and C0.7 Industrial Engines Cold Weather Operation
3500 Industrial and Generator Set Engines Refill Capacities
C32 Marine Auxiliary Engine Catalyst (SCR) - Replace
New Starters Are Now Used for Certain C9.3 Engines {1453} New Starters Are Now Used for Certain C9.3 Engines {1453}
Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571} Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571}
3512E HD Petroleum Engine Engine Oil - Change