New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620}
- Engine
- 3512C (S/N: MLM1-UP)
A new engine software is now available for 3512C Engines that are used in certain Mining Shovels. The software is updated to require Factory Passwords to clear Level 3 events.
The new and former software part number are listed in Table 1.
Show/hide table
| New Part Number | Part Name | Former Part Number (1) |
|---|---|---|
| Engine Software |
Show/hide table
| (1) | The former part number listed is for reference only and may differ. |
Caterpillar Information System:
C0.5 and C0.7 Industrial Engines Diagnostic Flash Code Retrieval
C0.5 and C0.7 Industrial Engines Overspeed
C0.5 and C0.7 Industrial Engines Gauges and Indicators
C0.5 and C0.7 Industrial Engines Emissions Certification Film
320GC and 320 Excavator Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Temperature Sensor - Brake Cooling Oil and Hydraulic Tank
320GC, 320 and 323 Excavators Machine Systems Stick Bearings and Seals - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Relief Valve (Cushion Crossover) - Anti-Reaction Valve
C9.3B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3516 Petroleum Engine Fluid Recommendations
320 GC, 320 and 323 Excavator Machine Systems Solenoid Valve (Fine Swing) - If Equipped
G3516 Petroleum Engine Overhaul (In-Frame)
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713} Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
3512E Engines Fuel Control Valve - Remove and Install - Primary
C0.5 and C0.7 Industrial Engines Starting the Engine
C0.5 and C0.7 Industrial Engines Stopping the Engine
120 and 120 AWD Motor Grader Maintenance Interval Schedule
C0.5 and C0.7 Industrial Engines Refill Capacities
New Water Temperature Regulators Available {1355} New Water Temperature Regulators Available {1355}
C9.3B Engines for Caterpillar Built Machines Camshaft - Remove
G3500H Generator Set Engine Fuel Differential Pressure Is Low
320 GC, 320 and 323 Excavator Machine Systems Joystick and Pedal - Calibrate
320GC, 320 and 323 Excavators Machine Systems Boom Bearings and Seals - Remove and Install
C0.5 and C0.7 Industrial Engines Monitoring System