Emissions Certification Film
Show/hide table
| |
| Illustration 1 | g02281173 |
|
Typical example | |
The emission label, refer to illustration 1 will be installed on the front cover of the engine.
Show/hide table
| |
| Illustration 2 | g02052934 |
|
Typical example | |
Caterpillar may supply the fuel label with every engine. Refer to illustration 2. The equipment manufacturer must install the label to the equipment. The label must be attached to the equipment near the inlet of the fuel tank. This action will comply with the EPA regulations. The equipment manufacturer may install another fuel label . If another fuel label is used, the equipment manufacturer must send a drawing or a photo of the label to Caterpillar through the Cat dealer. This action will ensure compliance of the label.
Caterpillar Information System:
320GC and 320 Excavator Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Temperature Sensor - Brake Cooling Oil and Hydraulic Tank
320GC, 320 and 323 Excavators Machine Systems Stick Bearings and Seals - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Relief Valve (Cushion Crossover) - Anti-Reaction Valve
C9.3B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3516 Petroleum Engine Fluid Recommendations
320 GC, 320 and 323 Excavator Machine Systems Solenoid Valve (Fine Swing) - If Equipped
G3516 Petroleum Engine Overhaul (In-Frame)
C0.5 and C0.7 Industrial Engines Maintenance Interval Schedule
C0.5 and C0.7 Industrial Engines Hoses and Clamps - Inspect/Replace
C32 Marine Auxiliary Engine Fluid Recommendations
797 Off-Highway Truck Steering Linkage - Check
C0.5 and C0.7 Industrial Engines Gauges and Indicators
C0.5 and C0.7 Industrial Engines Overspeed
C0.5 and C0.7 Industrial Engines Diagnostic Flash Code Retrieval
New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620} New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620}
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713} Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
3512E Engines Fuel Control Valve - Remove and Install - Primary
C0.5 and C0.7 Industrial Engines Starting the Engine
C0.5 and C0.7 Industrial Engines Stopping the Engine
120 and 120 AWD Motor Grader Maintenance Interval Schedule
C0.5 and C0.7 Industrial Engines Refill Capacities
New Water Temperature Regulators Available {1355} New Water Temperature Regulators Available {1355}
C9.3B Engines for Caterpillar Built Machines Camshaft - Remove