New Starters Are Now Used for Certain C9.3 Engines {1453} Caterpillar


New Starters Are Now Used for Certain C9.3 Engines {1453}

Usage:

C9.3 C9N
Industrial Engine
C9.3 (S/N: CS91-1475; C9N1-1537; D9N1-5570)

Description Of Change: The new starters used are made of more robust materials to help prevent overheating due to prolonged cranking cycles.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

The new 520-6650 Electric Starting Motor Gp is for the left-hand side of the engine. The new 520-6649 Electric Starting Motor Gp is for the right-hand side of the engine.

The new M105R starter does have different cross sectional geometry that increases the envelope size.

  • The new starters larger envelope should be considered for installation and checked for clearance.
The new M105R starter is equipped with pin type connectors for the wiring harness, whereas the current IMT starter uses ring type connectors.

  • If replacing an existing IMT starter on an engine in the field, the wiring harness will require modification to accommodate the new M105R starter.

  • The new M105R starters have a Left-Hand and Right-Hand configuration.
Replacement of IMT starters will take place in two stages:

  • Stage 1: M105R starters will be compatible with SAE-1 Housing (6/8 pitch ring gear of Flywheel).

  • Stage 2: Implementation date TBD. Stage 2 M105R starters will be compatible with SAE-2 Housing (8/10 pitch ring gear of Flywheel).
Common parts used with the starters are listed in Table 1.

Table 1
Qty  Part Number  Part Name 
8T-8730  Connector Socket 
9W-0844  Connector Socket 
230-4011  Connector Plug As 
The starters listed in Table 2 contain the previous part numbers that will no longer be service replacements.

Table 2
Previous Part Numbers  Part Name 
293-4853  Electric Starting Motor Gp 
344-0302  Electric Starting Motor Gp 
348-0264  Electric Starting Motor Gp 
348-3303  Electric Starting Motor Gp 
349-9074  Electric Starting Motor Gp 
349-9075  Electric Starting Motor Gp 
349-9076  Electric Starting Motor Gp 

Caterpillar Information System:

C32 Marine Auxiliary Engine Catalyst (SCR) - Replace
3500 Industrial and Generator Set Engines Refill Capacities
C0.5 and C0.7 Industrial Engines Cold Weather Operation
C0.5 and C0.7 Industrial Engines Monitoring System
320GC, 320 and 323 Excavators Machine Systems Boom Bearings and Seals - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Joystick and Pedal - Calibrate
G3500H Generator Set Engine Fuel Differential Pressure Is Low
C9.3B Engines for Caterpillar Built Machines Camshaft - Remove
New Water Temperature Regulators Available {1355} New Water Temperature Regulators Available {1355}
C0.5 and C0.7 Industrial Engines Refill Capacities
120 and 120 AWD Motor Grader Maintenance Interval Schedule
C0.5 and C0.7 Industrial Engines Stopping the Engine
Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571} Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571}
3512E HD Petroleum Engine Engine Oil - Change
3512E Land Electric Drive Engine Oil Filter - Change
320 GC, 320 and 323 Excavator Machine Systems Main Pump - Calibrate
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
C9.3B Engines for Caterpillar Built Machines Camshaft - Install
New Engine Software is Now Available for Certain 3412 Series Engines {1920} New Engine Software is Now Available for Certain 3412 Series Engines {1920}
336 and 336 GC Excavator Safety Messages
Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461} Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461}
3512E HD Petroleum Engine Fuel System - Prime
730,735 and 730 EJECTOR Articulated Truck Systems Solenoid Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.