Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461}
- Engine
- 3208 (S/N: 30A1-UP; 5YF1-UP)
- 3304 (S/N: 83Z1-UP)
- 3304B (S/N: 9HK1-UP)
- 3306 (S/N: 85Z1-UP)
- 3306B (S/N: 8JJ1-UP; 9NR1-UP)
- 3406C (S/N: 2WB1-UP)
- 3408 (S/N: 78Z1-UP)
- 3412 (S/N: 2WJ1-UP; 81Z1-UP)
- G3306 (S/N: 07Y1-UP)
- G3406 (S/N: 4FD1-UP)
- G3408 (S/N: 6NB1-UP)
- G3412 (S/N: 7DB1-UP)
- 3304 (S/N: 83Z1-UP)
- Generator Set
- 3406C GEN SET (S/N: 4ZR1-UP; 1LS1-UP)
Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.
Tool Fabrication Procedure
The following dimensions are to fabricate a circuit breaker inspection tool if required for inspection of certain 300-630 Amp "CJ" labeled circuit breakers.
Tool is constructed of 18 - 20 gage steel wire
An optional indicated insulation is a thermoplastic dip coating.
Show/hide table
Illustration 1 | g06202382 |
Dimensions are in millimeters. |
Caterpillar Information System:
336 and 336 GC Excavator Safety Messages
New Engine Software is Now Available for Certain 3412 Series Engines {1920} New Engine Software is Now Available for Certain 3412 Series Engines {1920}
C9.3B Engines for Caterpillar Built Machines Camshaft - Install
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
320 GC, 320 and 323 Excavator Machine Systems Main Pump - Calibrate
3512E Land Electric Drive Engine Oil Filter - Change
3512E HD Petroleum Engine Engine Oil - Change
Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571} Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571}
New Starters Are Now Used for Certain C9.3 Engines {1453} New Starters Are Now Used for Certain C9.3 Engines {1453}
C32 Marine Auxiliary Engine Catalyst (SCR) - Replace
3500 Industrial and Generator Set Engines Refill Capacities
C0.5 and C0.7 Industrial Engines Cold Weather Operation
3512E HD Petroleum Engine Fuel System - Prime
730,735 and 730 EJECTOR Articulated Truck Systems Solenoid Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
120 and 120 AWD Motor Grader Cab Air Filter - Replace
320 GC, 320 and 323 Excavator Machine Systems Specifications Track Roller (Single Flange)
320 GC, 320 and 323 Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
120 and 120 AWD Motor Grader Cooling Cores - Clean
120 and 120 AWD Motor Grader Fuses - Replace
The Accumulator Discharging and Charging Procedures are Updated {5077} The Accumulator Discharging and Charging Procedures are Updated {5077}
XGC1900 Generator Sets Maintenance Interval Schedule
XGC1900 Generator Sets Engine Air Cleaner Element - Clean/Replace
797F CMD Off-Highway Trucks Hydraulic Oil Filter - Replace - for Command Steering Valve