New Engine Software is Now Available for Certain 3412 Series Engines {1920}
- Electric Power Generation
- 3412 GENSET (S/N: XJ51-UP; DK61-UP)
- Engine
- 3412C (S/N: RTY1-UP)
- 3412E (S/N: TGC1-UP)
- Generator Set
- 3412C GEN SET (S/N: TWL1-UP)
The new engine software is now available on certain 3412 series engines that are listed above. The new engine software is capable for use on 462-0006 Electronic Control Gp (service replacement Electronic Control Module) with VN suffix.
The new and the former engine software part numbers are listed in Table 1.
Show/hide table
New Part Number | Part Name | Former Part Number(1) |
---|---|---|
Software Gp | ||
Software Gp | ||
Software Gp |
Show/hide table
(1) | The former part number listed is for reference only and may differ. |
The following changes are adaptable to the products within the listed serial numbers.
Caterpillar Information System:
C9.3B Engines for Caterpillar Built Machines Camshaft - Install
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
320 GC, 320 and 323 Excavator Machine Systems Main Pump - Calibrate
3512E Land Electric Drive Engine Oil Filter - Change
3512E HD Petroleum Engine Engine Oil - Change
Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571} Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571}
New Starters Are Now Used for Certain C9.3 Engines {1453} New Starters Are Now Used for Certain C9.3 Engines {1453}
C32 Marine Auxiliary Engine Catalyst (SCR) - Replace
3500 Industrial and Generator Set Engines Refill Capacities
C0.5 and C0.7 Industrial Engines Cold Weather Operation
C0.5 and C0.7 Industrial Engines Monitoring System
320GC, 320 and 323 Excavators Machine Systems Boom Bearings and Seals - Remove and Install
336 and 336 GC Excavator Safety Messages
Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461} Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461}
3512E HD Petroleum Engine Fuel System - Prime
730,735 and 730 EJECTOR Articulated Truck Systems Solenoid Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
120 and 120 AWD Motor Grader Cab Air Filter - Replace
320 GC, 320 and 323 Excavator Machine Systems Specifications Track Roller (Single Flange)
320 GC, 320 and 323 Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
120 and 120 AWD Motor Grader Cooling Cores - Clean
120 and 120 AWD Motor Grader Fuses - Replace
The Accumulator Discharging and Charging Procedures are Updated {5077} The Accumulator Discharging and Charging Procedures are Updated {5077}
XGC1900 Generator Sets Maintenance Interval Schedule