Track Roller (Single Flange)
Show/hide table
| |
| Illustration 1 | g03732606 |
|
Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | - | - | Before assembly, the surfaces must be clean and free of protective coating. |
| 2 | 2 | O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 3 | - | Track Roller Bearing | Bore after assembly is |
| Bore after assembly is |
|||
| 4 | 1 | 9W-2146 Plug | Before assembly, apply blue Loctite 243 to the threads. |
| Torque to |
|||
| 5 | 2 | Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
| - | - | - | End play for the track roller shaft: |
| Minimum is |
|||
| Maximum is |
Show/hide table
| (1) | For 461-7752 and 481-4789. |
| (2) | For 508-9458. |
Caterpillar Information System:
120 and 120 AWD Motor Grader Cab Air Filter - Replace
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
730,735 and 730 EJECTOR Articulated Truck Systems Solenoid Valve
3512E HD Petroleum Engine Fuel System - Prime
Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461} Inspection Tool Fabrication for CJ Circuit Breakers for Certain 3200, 3300, G3300, 3400, and G3400 Generator Sets {0734, 4461}
336 and 336 GC Excavator Safety Messages
New Engine Software is Now Available for Certain 3412 Series Engines {1920} New Engine Software is Now Available for Certain 3412 Series Engines {1920}
C9.3B Engines for Caterpillar Built Machines Camshaft - Install
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
320 GC, 320 and 323 Excavator Machine Systems Main Pump - Calibrate
3512E Land Electric Drive Engine Oil Filter - Change
3512E HD Petroleum Engine Engine Oil - Change
320 GC, 320 and 323 Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
120 and 120 AWD Motor Grader Cooling Cores - Clean
120 and 120 AWD Motor Grader Fuses - Replace
The Accumulator Discharging and Charging Procedures are Updated {5077} The Accumulator Discharging and Charging Procedures are Updated {5077}
XGC1900 Generator Sets Maintenance Interval Schedule
XGC1900 Generator Sets Engine Air Cleaner Element - Clean/Replace
797F CMD Off-Highway Trucks Hydraulic Oil Filter - Replace - for Command Steering Valve
XGC1900 Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
XGC1900 Generator Sets Fan Drive Bearing - Lubricate
XGC1900 Generator Sets Fumes Disposal Filter Element - Inspect
XGC1900 Generator Sets Fumes Disposal Filter Differential Pressure - Check
C9.3B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install