3516B Generator Set Engines with Dynamic Gas Blending Caterpillar


Electronic Control Module (ECM) - In Cylinder Pressure Sensor (ICPS) ECM

Usage:

3512B ED3


图 1g06167262
(1) ECM


图 2g06167268
(2) ICPS ECM

电子控制模块 (ECM) (1) 控制大多数发动机功能。 该模块是安装在发动机上的环境密封装置。 ECM 监视传感器的各种输入以便控制发动机。 ECM 支持下列主要功能:

  • 起动/停机控制

  • 喷油正时控制

  • 发动机调速

  • 数据链路通信

  • 电气系统的诊断

  • 发动机运转的监测和保护

缸内压力传感器 (ICPS) ECM (2) 支持以下功能:

  • ICPS 的监测

模块中没有可移除的个性化模块。 通过 Cat® 电子技师 (ET) 将闪存文件编程设定到模块中,以便更改软件。

Caterpillar Information System:

3516B Generator Set Engines with Dynamic Gas Blending CAN Data Link
Radiator Fan Cracking or Breakage May Occur on Certain 3512 and 3516 Petroleum Engines {1356, 1360} Radiator Fan Cracking or Breakage May Occur on Certain 3512 and 3516 Petroleum Engines {1356, 1360}
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Fluid Recommendations
XQP60 and XQP100 Rental Generator Sets Refill Capacities
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Monitoring System
CX38-P892 Well Servicing Transmission Component Location
C8.7 and C12.9 Marine Engines Alternator Problem - Charging Problem and/or Noisy Operation
C8.7 and C12.9 Marine Engines Inlet Air Is Restricted
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Product Storage
C9.3B Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Product Lifting
XQP60 and XQP100 Rental Generator Sets Fluid Recommendations - Fuel Specification
C8.7 and C12.9 Marine Engines Speed/Timing - Test
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Catalyst (SCR) - Replace
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing General Information
3516B Generator Set Engines with Dynamic Gas Blending Centrifugal Oil Filters
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing Welding Precaution
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing Electronic Service Tools
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Pump - Remove
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing Component Location
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Warranty Information
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing Diagnostic Capabilities
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing Electrical Connectors
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing Configuration Parameters
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.