1983/03/16 Caterpillar


New Rack Shutoff Solenoid Available

Usage:


3400 Series Industrial, Marine And Generator Set Engines

Description of Change: A new rack shutoff solenoid is available for the above engines. The new solenoid will give longer service life.

Adaptable As: The new 9G8180 Rack Shutoff Solenoid is available for replacement of the 2N2385 Rack Shutoff Solenoid. A 2W6386 Time Delay Conversion Group must be installed with the new solenoid. See the article, "New Time Delay Conversion Group Available" in the August 25, 1982 Engine News.

If the 2W6386 Time Delay Conversion Group is not used with the 9G8180 Solenoid, failure of the temperature and pressure switches is possible.

Caterpillar Information System:

1983/03/16 Test Procedure For Hydramechanical Shutoff After Engine Storage
1983/02/16 Change In Repair Centers For 5P2160 Horsepower Meter Group
1983/02/16 New Clutch Retraction Pins And Seals
1983/02/16 Parts Service Information For Pistons
1983/02/16 Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16 Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16 Low Manifold Pressure: New Gasket Prevents Air Leakage At Aftercooler
1983/02/16 New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16 Improved Cylinder Head Gasket
1983/02/16 List Of Service Publications
1983/02/16 Special Instruction Available For "Troubleshooting And Repair Of The 6V2100 Multitach"
1983/02/16 Notice: Bolts, Washers Can Fall Into Suction Screen Housing And Damage Oil Pump
1983/03/16 New Clutches For Rear Power Take-Off
1983/03/16 Change Made To 6V3032 Deluxe Test Lead Kit
1983/03/16 Check Cylinder Bores For Chamfer During Reconditioning
1983/03/16 New Instruction Decal Used On 6V4060 Engine Set Point Indicator
1983/03/16 Additions To Reference Chart For Major Production Changes
1983/03/16 Engine Valve Stem "Use Again" Specifications
1983/03/16 New Turbocharger Inlet Tube Assembly And New Seal Available
1983/03/16 Use FT1783 Fixture To Drill Vent Holes In Impeller
1983/03/16 "Gas Engine Application And Installation Guide" Now Available
1983/04/27 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27 List Of Service Publications
1983/04/27 8S1603 Socket Group For Use On Bolts With 12 Point Heads
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.