Additions To Reference Chart For Major Production Changes
Usage:
3208 Industrial And Marine Engines
The article "Reference Chart For Major Production Changes On 3208 Industrial and Marine Engines," in the Engine News dated November 25, 1981, has a list of articles that announced major changes to these engines. The articles in the chart that follows are additions to the earlier reference chart. Make a note of this new information in the earlier Engine News.
Caterpillar Information System:
1983/03/16 New Instruction Decal Used On 6V4060 Engine Set Point Indicator
1983/03/16 Check Cylinder Bores For Chamfer During Reconditioning
1983/03/16 Change Made To 6V3032 Deluxe Test Lead Kit
1983/03/16 New Clutches For Rear Power Take-Off
1983/03/16 New Rack Shutoff Solenoid Available
1983/03/16 Test Procedure For Hydramechanical Shutoff After Engine Storage
1983/02/16 Change In Repair Centers For 5P2160 Horsepower Meter Group
1983/02/16 New Clutch Retraction Pins And Seals
1983/02/16 Parts Service Information For Pistons
1983/02/16 Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16 Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16 Low Manifold Pressure: New Gasket Prevents Air Leakage At Aftercooler
1983/03/16 Engine Valve Stem "Use Again" Specifications
1983/03/16 New Turbocharger Inlet Tube Assembly And New Seal Available
1983/03/16 Use FT1783 Fixture To Drill Vent Holes In Impeller
1983/03/16 "Gas Engine Application And Installation Guide" Now Available
1983/04/27 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27 List Of Service Publications
1983/04/27 8S1603 Socket Group For Use On Bolts With 12 Point Heads
1983/04/27 New Shutoff Solenoid Group Used
1983/04/27 Changes To Valve Clearance Settings
1983/04/27 Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/04/27 New Special Instruction Available For 6V4135 Halogen Leak Detector
1983/04/27 Remove Plastic Plug From Fuel Transfer Pump