6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
Usage:
All 3304 And 3306 Engines
New 6V6175 and 6V6176 Torque Adapters are now available. These adapters are bolted to the fuel pump drive gear. This makes it possible to put a specific torque on the gear with a torque wrench while the bolt in the center is tightened to the correct torque specification.
The 6V6176, which is a replacement for the FT1650 Adapter, is used for engines with automatic timing advance. The 6V6175 is a replacement for the FT1644 Adapter and is used on engines without automatic timing advance.
Caterpillar Information System:
1982/11/10 6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/11/10 Improvements To Generator-Mounted Control Panels
1982/11/10 Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes
1982/10/20 Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20 Improvement To Engine Overspeed Alarm System
1982/10/20 New Fasteners Used For Fuel Injection Lines
1982/10/20 FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20 New Head Gasket Improves Seal Between Block And Liner Flange
1982/10/20 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/10/20 Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20 Planned Engine Repairs
1982/10/20 Improved Valve Cover Seal
1982/11/10 New Crankshaft Seal Groups Used
1982/11/10 High Compression Pistons Can Be Used In Engines Used At High Altitudes
1982/11/10 Resurfaced Cylinder Blocks And Heads
1982/11/10 New Crankshaft Assemblies
1982/11/10 New Guard Assemblies Used
1982/11/10 Reference Chart for Engine Improvements
1982/11/10 New Generators
1982/11/10 Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10 New Gears Will Decrease Noise Level
1982/12/15 Improvements Made To Fuel Ratio Control {1278}
1982/12/15 New Piston Group Has A Thicker Top Ring
1982/12/15 New Seal Used On Governor Control Shaft