Filter Screen (Air) - Inspect/Clean
Show/hide table
| |
| Illustration 1 | g06033530 |
Note: Before servicing the air filter screen (1), shut off the air supply to the air filter screen.
- Remove the air filter screen (1) from the manifold.
- Inspect the air filter screen.
- Clean the air filter screen by back flushing with water in the reverse direction of the arrow. If the desired flow cannot be obtained, then replace the air filter screen.
- Install the air filter screen to the manifold. Ensure that the directional arrow is pointing towards the cabinet.
Caterpillar Information System:
G3516B Engines Fuel Metering Valve
C18 Generator Set Engines Crankshaft Rear Seal - Remove and Install
XQP150 Rental Generator Set Plate Locations and Film Locations
XQP150 Rental Generator Set Plate Locations and Film Locations
XQP150 Rental Generator Set Product Description
C18 Generator Set Engines Flywheel - Remove and Install
C18 Generator Set Engines Water Temperature Regulator Housing - Remove and Install
Product Link For Generator Sets Parameters
C18 Generator Set Engines Water Pump - Assemble
C18 Generator Set Engines Water Pump - Disassemble
3516C Generator Set Engines Turbocharger - Install
® Grade & Slope for Cold Planers Grade Control Guidance Screen
3512E Engines Accessory Drive (Front) - Remove and Install
C18 Generator Set Engines Flywheel Housing - Remove and Install
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Conveyor (First Stage) - Test - Case Drain Flow for Piston Motor
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Conveyor (Second Stage) - Test - Case Drain Flow for Piston Motor
XQP1100 Generator Set Cold Weather Operation
C7 and C9 Industrial Engines Air Inlet Heater Circuit - Test
TR35 Railway Transmission General Troubleshooting Information
A New Turbocharger Is Used on Certain 3512C HD Power Module Engines {1052} A New Turbocharger Is Used on Certain 3512C HD Power Module Engines {1052}
New Software Is Used for Certain C32 Marine Auxiliary Engines {7610, 7620} New Software Is Used for Certain C32 Marine Auxiliary Engines {7610, 7620}
XQP1100 Generator Set Starting the Engine
C18 Generator Set Engines Vibration Damper and Pulley - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Water Pump - Separate Circuit Water Pump