Water Pump - Disassemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 8S-2264 | Puller Group | 1 |
4B-3903 | Bolt | 2 | |
1P-0456 | Plate | 1 | |
4B-4277 | Washer | 2 | |
B | 9S-9152 | Bearing Puller Gp | 1 |
C | 9S-5565 | Pin Puller Sleeve As | 1 |
Start By:
- Remove the water pump.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove O-ring seal (10) from housing (1).
- Use Tooling (A) to remove impeller (4) from shaft (6).
- Remove bolts (3) from housing (1). Remove retainer (5) and water pump shaft (6) from the housing.
- Use Tooling (C) and remove gear (2) from water pump shaft (6).
- Use a press and Tooling (B) to remove bearing assembly (8) from water pump shaft (6).
- Invert the housing and drive or press seal group (7) out of the housing.
- Invert the housing and drive or press lip seal (9) out of the housing.
Show/hide table
Illustration 1 | g01021798 |
Caterpillar Information System:
3516C Generator Set Engines Turbocharger - Install
® Grade & Slope for Cold Planers Grade Control Guidance Screen
C9.3 Marine Auxiliary Engines Maintenance Interval Schedule - Marine Generator Set
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Auxiliary Hydraulic System Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Visual Inspection (Auxiliary Hydraulic System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Machine Preparation for Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Propel System Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Visual Inspection (Power Train)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Machine Preparation for Troubleshooting
The Model Directory for Authorized Classic Machines has been Updated {1000, 7000} The Model Directory for Authorized Classic Machines has been Updated {1000, 7000}
High Fuel Rail Pressure Alarm May Malfunction on Certain Generator Sets {7610, 7620} High Fuel Rail Pressure Alarm May Malfunction on Certain Generator Sets {7610, 7620}
G3600 Engines Maintenance Interval Schedule
C18 Generator Set Engines Water Pump - Assemble
Product Link For Generator Sets Parameters
C18 Generator Set Engines Water Temperature Regulator Housing - Remove and Install
C18 Generator Set Engines Flywheel - Remove and Install
XQP150 Rental Generator Set Product Description
XQP150 Rental Generator Set Plate Locations and Film Locations
XQP150 Rental Generator Set Plate Locations and Film Locations
C18 Generator Set Engines Crankshaft Rear Seal - Remove and Install
G3516B Engines Fuel Metering Valve
C175-20 Locomotive Engine Filter Screen (Air) - Inspect/Clean
3512E Engines Accessory Drive (Front) - Remove and Install
C18 Generator Set Engines Flywheel Housing - Remove and Install