XQP150 Rental Generator Set Caterpillar


Electrical System

Usage:

XQP150 PJ7
A töltőegység működése közben soha ne válassza le a töltőegység valamely áramkörét vagy az akkumulátor-áramkör kábelét az akkumulátorról. A keletkező szikra belobbanthatja az egyes akkumulátorok által termelt gyúlékony gázokat.

Az egyes akkumulátorok által termelt gyúlékony gázok szikrák által történő begyújtásának elkerülése érdekében a külső energiaforrástól érkező negatív "−" bikaindítókábelt kell utoljára csatlakoztatni az indítómotor negatív "−" érintkezőjéhez. Ha az indítómotoron nincs negatív "−" érintkező, csatlakoztassa a motorblokkhoz a kábelt.

Naponta ellenőrizze, hogy nincsenek-e meglazult vagy kopott elektromos kábelek. A motor beindítása előtt szorítsa meg az összes meglazult elektromos csatlakozást. A motor indítása előtt javítsa meg az összes elkopott vezetéket. Az indítással kapcsolatban lásd: Használati és karbantartási kézikönyv, A motor indítása.

Földelés

Az alapkereten, a vezérlőpanel központi földelőkapcsán közös földelési pont található.

Karbantartást követően ügyeljen az összes földelőkötés visszahelyezésére.



Illusztráció 1g06045709
A földelőrendszer elhelyezkedése a vezérlőpanelen.
(1) Közös földelési pont (központi földelőrúd)

Caterpillar Information System:

PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Travel Speed - Test
Beat In and Wear at the Clutch Plate Splines on Certain CX31 Transmissions {0374, 0599, 3030, 3050, 3064, 3160, 3190} Beat In and Wear at the Clutch Plate Splines on Certain CX31 Transmissions {0374, 0599, 3030, 3050, 3064, 3160, 3190}
C12.9 Marine Engines Rocker Arm and Shaft - Remove and Install
Proper Storage Procedures Are Available For Commercial Engines {1000} Proper Storage Procedures Are Available For Commercial Engines {1000}
Product Link For Generator Sets Features
C12.9 Marine Engines Fuel Lines - Remove and Install
C12.9 Marine Engines Electronic Unit Injector - Remove and Install
3608 Engine Connecting Rod
3516C Generator Set Engines Turbocharger - Remove
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (Auxiliary) - Test and Adjust - Auxiliary Power Unit
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Pressure Reducing Valve - Test and Adjust - Right Grade Ski Control
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Steering Angle - Calibrate
XQP150 Rental Generator Set Generator Isolating for Maintenance
C9.3 Industrial Engine Selective Catalytic Reduction Warning System
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Relief Valve (Charge) - Test - Conveyor
G3600 Engines Maintenance Interval Schedule
High Fuel Rail Pressure Alarm May Malfunction on Certain Generator Sets {7610, 7620} High Fuel Rail Pressure Alarm May Malfunction on Certain Generator Sets {7610, 7620}
The Model Directory for Authorized Classic Machines has been Updated {1000, 7000} The Model Directory for Authorized Classic Machines has been Updated {1000, 7000}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Machine Preparation for Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Visual Inspection (Power Train)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Propel System Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Machine Preparation for Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Visual Inspection (Auxiliary Hydraulic System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Auxiliary Hydraulic System Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.