Inlet and Exhaust Valve Guides - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A(1) | 9U-6895 | Valve Guide Driver | 1 |
B(1) | 9U-6894 | Guide Collar | 1 |
C | 455-0128 | Seal Installer | 1 |
Show/hide table
(1) | Part of 9U-7530 Engine Tool Group |
Start By:
- Remove the inlet and exhaust valves.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove valve stem seal (1) from valve guide (2).
- Use Tooling (A) and a hammer to remove the valve guide from the cylinder head.
Show/hide table
Illustration 1 | g01073841 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 2 | g01073842 |
- Lubricate the bores for the valve guides with clean engine oil.
- Install valve guide (2) in the cylinder head with Tooling (A) and Tooling (B).
Note: Tooling (B) must be used to install the valve guide to the correct height.
Height to top of valve guide from cylinder head surface ...
35.00 ± 0.50 mm (1.378 ± 0.020 inch) Note: For more information, refer to Specifications, "Cylinder Head Valves".
- Use Tooling (C) to install valve stem seal (1) on the valve guide.
End By:
- Install the inlet and exhaust valves.
Caterpillar Information System:
XQP150 Rental Generator Set Battery Disconnect Switch
3512E Engines Engine Oil Pan - Assemble
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System System Pressure - Release
A Hose Assembly for the Fast Fill Fuel Adapter Group has been Updated on Certain G Series Small Off-Highway Trucks {0782, 1710, 7554} A Hose Assembly for the Fast Fill Fuel Adapter Group has been Updated on Certain G Series Small Off-Highway Trucks {0782, 1710, 7554}
C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
TR35 Railway Transmission Speed Sensor
XQP150 Rental Generator Set Generator Operation
XQP150 Rental Generator Set Single Unit Operation
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Injector
C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
C175 Generator Sets Overhaul (Top End)
3512E Engines Engine Oil Pan - Disassemble
TR35 Railway Transmission Temperature Sensor (Transmission Oil)
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Basic Engine
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Oil Contamination - Test
New Flywheels Are Now Used on Certain G3500 Engines {1156} New Flywheels Are Now Used on Certain G3500 Engines {1156}
TR35 Railway Transmission Torque Converter
3512E Engines Engine Oil Scavenge Pump - Remove and Install
The Reuse and Salvage Guidelines for HVOF Cylinders has been Updated {0599, 0679, 0738, 4303, 5102, 7562} The Reuse and Salvage Guidelines for HVOF Cylinders has been Updated {0599, 0679, 0738, 4303, 5102, 7562}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Relief Valve (Charge) - Test and Adjust - Propel
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C12.9 Marine Engines Cylinder Head - Remove and Install
New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380} New Heat Shields Are Now Used On Certain C175 Marine Engines {1052, 1067, 1307, 1380}
A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355} A New Water Line Bracket Is Used on Certain 3500 Marine Engines {1355}