Engine Oil Pan - Disassemble
Start By:
- Remove engine oil pan.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove drain plug (1).
- Remove bolts (3), oil pan (2), and the gasket.
Show/hide table
Illustration 2 g06040033 - Remove bolts (4) and plate (5).
- Remove bolts (8), bolts (9), cover (7), cover (10), and pipe plug (6).
Show/hide table
Illustration 3 g06040050 - Remove bolts (11) and cover (12).
- Remove plugs (13) and plug (14).
Show/hide table
Illustration 4 g06040097 - Remove oil screen handle (15) and tube assembly (18).
- Remove bolts (17) and oil screen housing (16).
Show/hide table
Illustration 1 | g06040016 |
Caterpillar Information System:
C18 Generator Set Engines Air Inlet Elbow - Remove and Install
C18 Generator Sets Voltage Regulators
C18 Generator Set Engines Inlet Module (Catalyst) - Remove and Install
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Closed Crankcase Ventilation (CCV) System
XQP1100 Generator Set Stopping the Engine
3512E Engines Engine Oil Pan - Remove and Install
XQP150 Rental Generator Set Alternator - Inspect
XQP150 Rental Generator Set Battery - Replace
C12.9 Marine Engines Crankcase Pressure Sensor - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Radiator
C18 Generator Set Engines Diesel Particulate Filter - Remove and Install
Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064} Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064}
C175 Generator Sets Overhaul (Top End)
C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Injector
XQP150 Rental Generator Set Single Unit Operation
XQP150 Rental Generator Set Generator Operation
TR35 Railway Transmission Speed Sensor
C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
A Hose Assembly for the Fast Fill Fuel Adapter Group has been Updated on Certain G Series Small Off-Highway Trucks {0782, 1710, 7554} A Hose Assembly for the Fast Fill Fuel Adapter Group has been Updated on Certain G Series Small Off-Highway Trucks {0782, 1710, 7554}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System System Pressure - Release
3512E Engines Engine Oil Pan - Assemble
XQP150 Rental Generator Set Battery Disconnect Switch
C18 Generator Set Engines Inlet and Exhaust Valve Guides - Remove and Install