Air Inlet Elbow - Remove and Install
Show/hide table
Illustration 1 | g03375628 |
Show/hide table
Specification for 335-0959 Air Inlet Manifold Adapter Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 284-0671 Band Clamp | Torque to |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | LOCTITE 592 Thread Sealant |
- |
B | -- | LOCTITE 540 Plug Sealant |
- |
- Position fumes disposal filter (1) out of the way.
Show/hide table
Illustration 3 g02826916 - Loosen the clamps for hose (4). If necessary, remove hose (4).
- Disconnect the harness assembly from temperature sensor (5). Remove temperature sensor (5).
- Disconnect hose assembly (6). Loosen clamp (7).
- Remove bolts (3) and remove air inlet elbow (2).
Show/hide table
Illustration 4 g02826930 - Remove bolts (9) and tube (8).
Show/hide table
Illustration 5 g02826956 - Remove dowel (10) and O-ring seal (11). Remove tube (12).
Show/hide table
Illustration 6 g02826960 - Remove cup plug (13) and pipe plug (14).
Show/hide table
Illustration 2 | g02826877 |
- Install air inlet elbow (2) in the reverse order of removal.
- Apply Tooling (A) to the threads of pipe plug (14).
- Apply Tooling (B) to cup plug (13).
- Tighten clamp (7) to a torque of
8.5 ± 1 N·m (75 ± 9 lb in) . - Tighten temperature sensor (5) to a torque of
20 ± 5 N·m (177 ± 44 lb in) .
Caterpillar Information System:
C18 Generator Sets Voltage Regulators
C18 Generator Set Engines Inlet Module (Catalyst) - Remove and Install
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Closed Crankcase Ventilation (CCV) System
XQP1100 Generator Set Stopping the Engine
3512E Engines Engine Oil Pan - Remove and Install
XQP150 Rental Generator Set Alternator - Inspect
XQP150 Rental Generator Set Battery - Replace
C12.9 Marine Engines Crankcase Pressure Sensor - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Radiator
C18 Generator Set Engines Diesel Particulate Filter - Remove and Install
Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064} Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064}
Proximity Awareness Commissioning Checklist {7605, 7610, 7620} Proximity Awareness Commissioning Checklist {7605, 7610, 7620}
3512E Engines Engine Oil Pan - Disassemble
C175 Generator Sets Overhaul (Top End)
C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Injector
XQP150 Rental Generator Set Single Unit Operation
XQP150 Rental Generator Set Generator Operation
TR35 Railway Transmission Speed Sensor
C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
A Hose Assembly for the Fast Fill Fuel Adapter Group has been Updated on Certain G Series Small Off-Highway Trucks {0782, 1710, 7554} A Hose Assembly for the Fast Fill Fuel Adapter Group has been Updated on Certain G Series Small Off-Highway Trucks {0782, 1710, 7554}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System System Pressure - Release
3512E Engines Engine Oil Pan - Assemble
XQP150 Rental Generator Set Battery Disconnect Switch