C12.9 Marine Engines Caterpillar


Crankcase Pressure Sensor - Remove and Install

Usage:

C12.9 PC7

Removal Procedure



    Illustration 1g06039642

  1. Remove harness assembly (1) and remove crankcase pressure sensor (2).

Installation Procedure

  1. Install crankcase pressure sensor (2) in the reverse order of removal. Tighten crankcase pressure sensor (2) to a torque of 20 ± 2 N·m (177 ± 18 lb in).

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Radiator
C18 Generator Set Engines Diesel Particulate Filter - Remove and Install
Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064} Installation Procedure for the Aftercooler on Certain 3512C Locomotive Engines {1059, 1063, 1064}
Proximity Awareness Commissioning Checklist {7605, 7610, 7620} Proximity Awareness Commissioning Checklist {7605, 7610, 7620}
Cat® Command for Hauling Terrain Onboard Commissioning Procedure {7610, 7620} Cat® Command for Hauling Terrain Onboard Commissioning Procedure {7610, 7620}
Improved Transmission Filter Bypass Switch is Now Used on Certain Products {3004, 3067} Improved Transmission Filter Bypass Switch is Now Used on Certain Products {3004, 3067}
Cat® Site Positioning Commissioning Procedure {7605, 7610, 7620} Cat® Site Positioning Commissioning Procedure {7605, 7610, 7620}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Sensor Supply - Test
C18 Generator Set Engines Catalyst (SCR) - Remove and Install
C4.4 and C7.1 Engines Engine Misfires, Runs Rough or Is Unstable
XQP500 Generator Sets Control Panel
TR35 Railway Transmission Gear Pump (Transmission)
XQP150 Rental Generator Set Battery - Replace
XQP150 Rental Generator Set Alternator - Inspect
3512E Engines Engine Oil Pan - Remove and Install
XQP1100 Generator Set Stopping the Engine
DG30, DG50, DG60, DG80, DG100, DG125, and DG150 Generator Set Engines Closed Crankcase Ventilation (CCV) System
C18 Generator Set Engines Inlet Module (Catalyst) - Remove and Install
C18 Generator Sets Voltage Regulators
C18 Generator Set Engines Air Inlet Elbow - Remove and Install
3512E Engines Engine Oil Pan - Disassemble
C175 Generator Sets Overhaul (Top End)
C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Injector
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.