Water Lines on Certain C2.2 Marine Generator Sets {1380}
- Generator Set
- C2.2 (S/N: TAG657-657,659-1062,1064-1068,1071-1071,1073-1073,1075-1079,1081-1081,1083-1084,1087-1094,1096-1100,1103-1103,1105-1116,1118-1127,1129-1144,1146-1147,1150-1174,1176-1186,1188-1198,1203-1203,1219-1221,1223-1224,1226-1239,1241-1253,1255-1260,1262-1265,1267-1279,1281-1290,1292-1301)
- C2.2 GEN SET (S/N: JAW216-322,324-461,463-505,507-520,522-524,526-531,533-536,538-567,569-573,576-584,586-591,593-604,606-607,609-612,616-621,623-624,626-641,643-644,646-661,663-673,675-679,681-685,688-689,691-701,703-705,707-712,714-733,736-736,738-745,747-748,750-752,754-754,757-760,763-766,768-780,782-792,794-813,815-816,818-822,824-832,834-837,839-840,842-848,850-856,859-862,866-879,881-884,886-891,893-900,902-908)
There have been some instances where the 323-8726 Hose is in contact with the cylinder block. This issue is due to a manufacturing problem which has now been resolved.
Show/hide table
| |
| Illustration 1 | g06032192 |
|
View of the (1) | |
Inspect Hose (1) for leaks. Check whether Hose (1) is in contact with the cylinder block at position (A). Refer to Illustration 1.
If the 323-8726 Hose is in contact with the cylinder block, install a new 323-8726 Hose.
If the 323-8726 Hose is showing signs of leaks, install a new 323-8726 Hose.
Show/hide table
| |
| Illustration 2 | g06032193 |
|
View of a new | |
Ensure that the new hose is correctly routed. Refer to Illustration 2.
Caterpillar Information System:
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Diesel Exhaust Fluid Nozzle - Inspect/Clean
3500E Marine Engines Welding on Engines with Electronic Controls
3500E Marine Engines Reference Information
C12.9 Marine Propulsion Engine Electric Starting Motor
Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070} Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070}
3500E Marine Engines Plate Locations and Film Locations
3500E Marine Engines Product Description
C12.9 Marine Engines Turbocharger - Remove and Install - Low-Pressure
C12.9 Marine Engines Turbocharger - Remove and Install - High-Pressure
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Coolant Temperature Sensor
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather
3500E Marine Engines Model View Illustrations
C32 Marine Auxiliary Engine Overhaul (Major)
C175-16 Oil and Gas Generator Set Overhaul (Top End)
794 AC Off-Highway Truck High Voltage Information
Installation Procedure for WasteGate Lines on Certain G3516B Engines {1052, 1380} Installation Procedure for WasteGate Lines on Certain G3516B Engines {1052, 1380}
New Coolant Lines Are Used on Certain G3516B Engines {1052, 1380} New Coolant Lines Are Used on Certain G3516B Engines {1052, 1380}
A New Turbocharger Is Now Used On Certain PM3512C HD Generator Sets {1052, 1053} A New Turbocharger Is Now Used On Certain PM3512C HD Generator Sets {1052, 1053}
A New Cylinder Pack Components are Now Used on Certain D3512B and D3516B Electric Power Generation (EPG) Engines {1239, 7555} A New Cylinder Pack Components are Now Used on Certain D3512B and D3516B Electric Power Generation (EPG) Engines {1239, 7555}
XQP150 Rental Generator Set Safety Messages
XQP150 Rental Generator Set General Hazard Information
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Service Tools
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Connector Locations