C12.9 Marine Propulsion Engine Caterpillar


Electric Starting Motor

Usage:

C12.9 PC7


Illustration 1g06031732
Typical example

Table 1
Specification for 482-9483 Electric Starting Motor Gp and 482-9497 Electric Starting Motor Gp 
Item  Qty  Part  Specification Description 
446-1518 Hex Flange Nut  Torque to 9 ± 1 N·m (80 ± 9 lb in)
461-0095 Isolator As  Torque to 9 ± 1 N·m (80 ± 9 lb in)
446-1530 Bolt  Torque to 25 ± 5 N·m (221 ± 44 lb in)
Operating Voltage is 24V. 

Caterpillar Information System:

Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070} Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070}
3500E Marine Engines Plate Locations and Film Locations
3500E Marine Engines Product Description
C12.9 Marine Engines Turbocharger - Remove and Install - Low-Pressure
C12.9 Marine Engines Turbocharger - Remove and Install - High-Pressure
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Coolant Temperature Sensor
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather
3500E Marine Engines Model View Illustrations
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Boost Pressure Sensor
3500E Marine Engines Engine Stopping
3500E Marine Engines General Hazard Information
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Speed/Timing Sensor
3500E Marine Engines Reference Information
3500E Marine Engines Welding on Engines with Electronic Controls
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Diesel Exhaust Fluid Nozzle - Inspect/Clean
Water Lines on Certain C2.2 Marine Generator Sets {1380} Water Lines on Certain C2.2 Marine Generator Sets {1380}
C32 Marine Auxiliary Engine Overhaul (Major)
C175-16 Oil and Gas Generator Set Overhaul (Top End)
794 AC Off-Highway Truck High Voltage Information
Installation Procedure for WasteGate Lines on Certain G3516B Engines {1052, 1380} Installation Procedure for WasteGate Lines on Certain G3516B Engines {1052, 1380}
New Coolant Lines Are Used on Certain G3516B Engines {1052, 1380} New Coolant Lines Are Used on Certain G3516B Engines {1052, 1380}
A New Turbocharger Is Now Used On Certain PM3512C HD Generator Sets {1052, 1053} A New Turbocharger Is Now Used On Certain PM3512C HD Generator Sets {1052, 1053}
A New Cylinder Pack Components are Now Used on Certain D3512B and D3516B Electric Power Generation (EPG) Engines {1239, 7555} A New Cylinder Pack Components are Now Used on Certain D3512B and D3516B Electric Power Generation (EPG) Engines {1239, 7555}
XQP150 Rental Generator Set Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.