A New Turbocharger Is Now Used On Certain PM3512C HD Generator Sets {1052, 1053}
- Power Module
- XQC1200 (S/N: N1G1-UP)
Description Of Change: The turbocharger has a new bearing design to prevent failures caused by under bearing coking.
Adaptable To: The new 489-3206 Turbocharger Gp which has the low temperature journal bearings. Table 1 contains the part numbers that are needed to install the new turbocharger group. Table 2 contains the effective serial numbers.
Show/hide table
Item | Qty | Part Number | Part Description |
---|---|---|---|
1 | 4 | O-Ring Seals | |
2 | 4 | Gaskets | |
3 | 4 | Oil Drain Gaskets | |
4 | 4 | Oil Supply Gaskets | |
5 | 4 | Seals | |
6 | 4 | Exhaust Manifold Gaskets | |
7 | 16 | High Temperature Bolts | |
8 | 16 | Locknuts | |
9 | 4 | Gaskets | |
10 | 4 | Turbocharger Gp | |
11 | 8 | O-Ring Seals |
Show/hide table
Effective Serial Numbers |
---|
S/N:N1G00103-UP |
Caterpillar Information System:
New Coolant Lines Are Used on Certain G3516B Engines {1052, 1380} New Coolant Lines Are Used on Certain G3516B Engines {1052, 1380}
Installation Procedure for WasteGate Lines on Certain G3516B Engines {1052, 1380} Installation Procedure for WasteGate Lines on Certain G3516B Engines {1052, 1380}
794 AC Off-Highway Truck High Voltage Information
C175-16 Oil and Gas Generator Set Overhaul (Top End)
C32 Marine Auxiliary Engine Overhaul (Major)
Water Lines on Certain C2.2 Marine Generator Sets {1380} Water Lines on Certain C2.2 Marine Generator Sets {1380}
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Diesel Exhaust Fluid Nozzle - Inspect/Clean
3500E Marine Engines Welding on Engines with Electronic Controls
3500E Marine Engines Reference Information
C12.9 Marine Propulsion Engine Electric Starting Motor
Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070} Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070}
3500E Marine Engines Plate Locations and Film Locations
A New Cylinder Pack Components are Now Used on Certain D3512B and D3516B Electric Power Generation (EPG) Engines {1239, 7555} A New Cylinder Pack Components are Now Used on Certain D3512B and D3516B Electric Power Generation (EPG) Engines {1239, 7555}
XQP150 Rental Generator Set Safety Messages
XQP150 Rental Generator Set General Hazard Information
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Service Tools
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Connector Locations
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Diagnostic Capabilities
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Symptom Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Emerging Symptom Information
New Canadian Standards Authority Ignition Groups Are Used for Certain G3400 Engines {1550} New Canadian Standards Authority Ignition Groups Are Used for Certain G3400 Engines {1550}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Determining Diagnostic Trouble Codes
New Software Is Used on Certain C9 Tier 3, C15 IMO II, and C32 Tier 2 Petroleum Hazardous Location Engines {7605, 7610} New Software Is Used on Certain C9 Tier 3, C15 IMO II, and C32 Tier 2 Petroleum Hazardous Location Engines {7605, 7610}