PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Caterpillar

Piston Motor (Propel)

Usage:

PM825 3C6

Show/hide table




Illustration 1	g06025543

Show/hide table




Illustration 2	g06025548
Detailed view of area A

Show/hide table

Table 1
Specification for 382-5359 Piston Motor Gp
Item	Qty	Part	Specification Description
1	1	246-7411 Spring	Free length of the spring is 19.0 mm (0.75 inch).

Show/hide table




Illustration 3	g06025553
Detailed view of area B

Show/hide table

Table 2
Item	Qty	Part	Specification Description
2	1	141-0269 Threaded Pin	Installation torque is 14 N·m (124 lb in).

Show/hide table




Illustration 4	g06025555
Detailed view of area C

Show/hide table

Table 3
Item	Qty	Part	Specification Description
3	As required use the following shims:
	1	209-9964 Shim	Thickness is 2.15 mm (0.085 inch).
	1	209-9965 Shim	Thickness is 2.20 mm (0.087 inch).
	1	209-9966 Shim	Thickness is 2.25 mm (0.089 inch).
	1	209-9967 Shim	Thickness is 2.30 mm (0.091 inch).
	1	209-9971 Shim	Thickness is 2.50 mm (0.098 inch).
4	7	252-0705 Screw	Torque to 4.7 N·m (41.6 lb in).
5	1	180-1279 Spacer	Thickness is 3.50 mm (0.138 inch).
	1	180-1278 Spacer	Thickness is 3.60 mm (0.142 inch).
	1	180-1277 Spacer	Thickness is 3.70 mm (0.146 inch).
	1	180-1274 Spacer	Thickness is 3.80 mm (0.150 inch).
	1	180-1275 Spacer	Thickness is 3.90 mm (0.154 inch).
	1	180-1276 Spacer	Thickness is 4.00 mm (0.158 inch).

Caterpillar Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track

New Software Is Available Engines and New Coolant Pressure Sensor Are Used on Certain C32 Marine Engines {1920} New Software Is Available Engines and New Coolant Pressure Sensor Are Used on Certain C32 Marine Engines {1920}

C175-20 Locomotive Engine System Pressure Release

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

C1.7 and C2.2 Industrial Engines Flywheel - Remove and Install

XQ35 Rental Generator Set Safety Messages

C18 Generator Set Engines Diesel Exhaust Fluid Module - Assemble

A New Accumulator Studs And Washers Are Now Available For Certain 3512 Engines {1252, 1254} A New Accumulator Studs And Washers Are Now Available For Certain 3512 Engines {1252, 1254}

Two Piece Stay Rod Installation Instructions {5070, 5070} Two Piece Stay Rod Installation Instructions {5070, 5070}

Crankshaft Pre-Assembly Instructions for Well Stimulation Pumps {1202, 6002} Crankshaft Pre-Assembly Instructions for Well Stimulation Pumps {1202, 6002}

Power End Rebuild Inspection Checklist for Well Stimulation Pumps {1202} Power End Rebuild Inspection Checklist for Well Stimulation Pumps {1202}

Torque Chart for Well Stimulation Pumps {0650, 6002} Torque Chart for Well Stimulation Pumps {0650, 6002}

C175-16 and C175-20 Locomotive Engines Turbocharger - Remove

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump

C1.7 and C2.2 Industrial Engines Engine Lifting Bracket - Remove and Install

PVT110, PVT115 4V3 and PVT117 4V3 Photovoltaic Modules Operation Information

C175-16 and C175-20 Locomotive Engines Crankcase Breather - Remove and Install

Software Issues on Certain C175-16 Generator Set Engines {7620} Software Issues on Certain C175-16 Generator Set Engines {7620}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Air Cleaner

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Pump Lines - Auxiliary