New Software is Available for Certain C1.5 and C2.2 Engines {1920, 7620} Caterpillar


New Software is Available for Certain C1.5 and C2.2 Engines {1920, 7620}

Usage:

C1.5 G9N
Industrial Engine
C1.5 (S/N: G9N1-1)
C2.2 (S/N: G9P1-1,203-203,206-206,211-229,232-232,234-238)

There have been several isolated instances of issues with the Aftertreatment Regeneration Device (ARD).The gauze within the ARD can become blocked and can result in low combustion temperatures. Low combustion temperatures will cause issues with ARD.

The following diagnostic trouble codes may be displayed in the electronic service tool:

  • 3473-7 Aftertreatment #1 Failed to Ignite: Not Responding Properly

  • 3719-XX Soot Loading Percent : High

Ensure that the latest available software is installed. Refer to Technical Marketing Information (TMI) for the latest flash file. Refer to Troubleshooting for information on installing flash files.

Caterpillar Information System:

C175-16 Marine Engine Inlet and Exhaust Valve Seat Inserts
C12.9 Marine Engines Coolant Temperature Sensor - Remove and Install
G3500H Generator Set Engine Nitrogen Oxide Sensor - Calibrate
Air Shut-Off Groups (3406B/C) {1078} Air Shut-Off Groups (3406B/C) {1078}
Functionality, Troubleshooting, Inspection, and Replacement for the 111-4374 Valve As (Check Valve Assembly) on Certain 3500 Commercial and Machine Engines {1355, 1393} Functionality, Troubleshooting, Inspection, and Replacement for the 111-4374 Valve As (Check Valve Assembly) on Certain 3500 Commercial and Machine Engines {1355, 1393}
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121} A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
New Engine Software Is Used for Certain 3500 Marine Engines {1920} New Engine Software Is Used for Certain 3500 Marine Engines {1920}
New Software for C175-20 Turbocharger Thrust Bearing Wear {1920} New Software for C175-20 Turbocharger Thrust Bearing Wear {1920}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Solenoid Valve - Test
C12.9 Marine Engines Aftercooler Condensate Drain Valve - Inspect/Clean
Recycling Instructions For Photovoltaic Modules {1471} Recycling Instructions For Photovoltaic Modules {1471}
C12.9 Marine Engines Electronic Control Module - Remove and Install
Engine Air Cleaner Elements on Certain C7.1 Engines {1051, 1052, 1054} Engine Air Cleaner Elements on Certain C7.1 Engines {1051, 1052, 1054}
XQ35 Rental Generator Set Maintenance Interval Schedule
323F SA and 323F LN Excavator Boom/Stick/Bucket Combinations
New VIMS Software is Now Available On Certain Large Off-Highway Truck/Tractors {7490, 7600, 7601, 7610, 7620} New VIMS Software is Now Available On Certain Large Off-Highway Truck/Tractors {7490, 7600, 7601, 7610, 7620}
C175-16 Locomotive Engine Electrical Power Supply - Test
CG137-08 and CG137-12 Engines Refill Capacities
C175-16 Locomotive Engine Sensor Calibration Required - Test
C175-16 Locomotive Engines Overhaul (Major)
New Software Is Used on Certain G3520C Landfill Engines {1280, 1920} New Software Is Used on Certain G3520C Landfill Engines {1280, 1920}
C1.7 and C2.2 Industrial Engine Valve Position - Test
C1.7 and C2.2 Industrial Engine Speed Control (Analog) - Test
C175–16 Locomotive Engine Aftertreatment SCR System Verification - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.