3516E Generator Set Engines Caterpillar


Engine Oil Filter

Usage:

3516E LCK


Illustration 1g06000634

Table 1
Specification for 480-2091 Engine Oil Filter Gp 
Item  Qty  Part  Specification Description 
2W-1969 Bypass Valve  Valve must move freely in bore. 
Start to open pressure is 287 ± 7 kPa (42 ± 1 psi).
Fully open pressure is 480 ± 7 kPa (70 ± 1 psi).
2W-1635 Spring  Length under test force is 102.0 mm (4.02 inch)
Test force is 518 ± 26 N (117 ± 6 lb).
Free length after test force is 143.4 mm (5.65 inch).
6V-3907 O-Ring Seal  Before assembly, lightly lubricate the bore for the O-ring seals with the lubricant that is being sealed. 
165-3931 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)
4W-6960 Housing Support  Torque to 55 ± 7 N·m (41 ± 5 lb ft)

Caterpillar Information System:

3516E Generator Set Engines Crankshaft
3516E Generator Set Engines Flywheel Housing
3516E Generator Set Engines Fuel Injector
G3508J, G3516J, and G3520J Engines Gas Pressure Regulator Solenoid - Remove and Install
G3508J, G3516J, and G3520J Engines Gas Pressure Regulator - Install
A New Coolant Elbow Assembly is Now Used on Certain C18 Marine Engines {1059} A New Coolant Elbow Assembly is Now Used on Certain C18 Marine Engines {1059}
G3508J, G3516J, and G3520J Engines Gas Pressure Regulator - Remove
3516B Generator Set with Dynamic Gas Blending Alternator Mounting
A New Fuel Valve Is Now Used for Certain G3500BPetroleum Engines and G3500H Electric Power Engines {1741, 5137} A New Fuel Valve Is Now Used for Certain G3500BPetroleum Engines and G3500H Electric Power Engines {1741, 5137}
797 Off-Highway Truck Link and Rear Cylinder (Suspension) - Check
New Software is Available for Certain C4.4 Engines {1920} New Software is Available for Certain C4.4 Engines {1920}
3500E Marine Engines Fuel Injector Mechanism
G3500H 60Hz Generator Sets Before Starting Engine
3516E Generator Set Engines Auxiliary Water Pump
G3500H 60Hz Generator Sets Starting the Engine
G3500H 60Hz Generator Sets Engine Operation
EMCP 4.4 Supervisory Control Panel Starting and Stopping
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Operation
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Machine Engines {1160, 1161} New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Machine Engines {1160, 1161}
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160} New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}
New Copper Lead Main and Connecting Rod Bearings Are Available For Certain 3500 Diesel Commercial Engines {1202, 1225} New Copper Lead Main and Connecting Rod Bearings Are Available For Certain 3500 Diesel Commercial Engines {1202, 1225}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets After Stopping Engine
G3508J, G3516J, and G3520J Engines Exhaust Bypass Valve - Remove and Install
3516E Generator Set Engines Cylinder Head Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.