3516E Generator Set Engines Caterpillar

Flywheel Housing

Usage:

3516E JD7

Show/hide table




Illustration 1	g06000502
Rear View

Show/hide table

Table 1
Specification for 438-6104 Flywheel Housing Gp
Item	Qty	Part	Specification Description
Before assembly, apply Loctite 5188 to the surface of the gasket.
1	6	9X-8873 Bolt	Length of one 1/2 inch bolt is 57.15 mm (2.250 inch). Torque to 135 ± 20 N·m (100 ± 15 lb ft). Torque to 120 ± 20 N.m (89 ± 15 lb ft) when DC Electric tool is used.
2	6	9X-8875 Bolt	Length of one 1/2 inch bolt is 88.9 mm (3.50 inch). Torque to 135 ± 20 N·m (100 ± 15 lb ft). Torque to 120 ± 20 N.m (89 ± 15 lb ft) when DC Electric tool is used.
3	2	9S-1374 Bolt	Length of one 1/2 inch bolt is 203.2 mm (8.00 inch). Torque to 135 ± 20 N·m (100 ± 15 lb ft). Torque to 120 ± 20 N.m (89 ± 15 lb ft) when DC Electric tool is used.
4	4	8S-9089 Bolt	Length of one 1/2 inch bolt is 114.3 mm (4.50 inch). Torque to 135 ± 20 N·m (100 ± 15 lb ft). Torque to 120 ± 20 N.m (89 ± 15 lb ft) when DC Electric tool is used.
5	18	1D-4590 Bolt	Length of one 5/8 inch bolt is 120.65 mm (4.750 inch). Torque to 270 ± 40 N·m (199 ± 30 lb ft). Torque to 240 ± 40 N.m (177 ± 30 lb ft) when DC Electric tool is used.

Caterpillar Information System:

3516E Generator Set Engines Fuel Injector

G3508J, G3516J, and G3520J Engines Gas Pressure Regulator Solenoid - Remove and Install

G3508J, G3516J, and G3520J Engines Gas Pressure Regulator - Install

A New Coolant Elbow Assembly is Now Used on Certain C18 Marine Engines {1059} A New Coolant Elbow Assembly is Now Used on Certain C18 Marine Engines {1059}

G3508J, G3516J, and G3520J Engines Gas Pressure Regulator - Remove

3516B Generator Set with Dynamic Gas Blending Alternator Mounting

A New Fuel Valve Is Now Used for Certain G3500BPetroleum Engines and G3500H Electric Power Engines {1741, 5137} A New Fuel Valve Is Now Used for Certain G3500BPetroleum Engines and G3500H Electric Power Engines {1741, 5137}

797 Off-Highway Truck Link and Rear Cylinder (Suspension) - Check

New Software is Available for Certain C4.4 Engines {1920} New Software is Available for Certain C4.4 Engines {1920}

3500E Marine Engines Fuel Injector Mechanism

3516E Generator Set Engines Accessory Drive

3516E Generator Set Engines Flywheel Housing Cover

3516E Generator Set Engines Crankshaft

3516E Generator Set Engines Engine Oil Filter

G3500H 60Hz Generator Sets Before Starting Engine

3516E Generator Set Engines Auxiliary Water Pump

G3500H 60Hz Generator Sets Starting the Engine

G3500H 60Hz Generator Sets Engine Operation

EMCP 4.4 Supervisory Control Panel Starting and Stopping

G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Operation

New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Machine Engines {1160, 1161} New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Machine Engines {1160, 1161}

New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160} New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}

New Copper Lead Main and Connecting Rod Bearings Are Available For Certain 3500 Diesel Commercial Engines {1202, 1225} New Copper Lead Main and Connecting Rod Bearings Are Available For Certain 3500 Diesel Commercial Engines {1202, 1225}

G3512 EPA Emergency and Non-Emergency Standby Generator Sets After Stopping Engine