Rocker Arm - Remove
开始:
- 拆下气门机构。 请参阅拆解和组装, "气门机构 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 从摇臂轴上卸下螺栓 (4)。
- 在所有部件上作识别标记,以便装配。
- 从摇臂轴的一端卸下螺栓 (3) 和盘 (2)。
- 从摇臂轴 (5) 上卸下摇臂 (6)、摇臂 (7) 和摇臂 (8)。
- 从摇臂上卸下按钮 (1) 和 O 形密封圈。
注: 使用 O 形密封圈将按钮 (1) 固定在摇臂上的合适位置。
Show/hide table
图 1 | g00940747 |
Show/hide table
图 2 | g00563304 |
Show/hide table
图 3 | g03890189 |
Caterpillar Information System:
Inspect Inlet Check Valve and Clean Expansion Chamber Before Installing Replacement Air Compressor to Avoid Repeat Compressor Failure{1803, 5502} Inspect Inlet Check Valve and Clean Expansion Chamber Before Installing Replacement Air Compressor to Avoid Repeat Compressor Failure{1803, 5502}
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Assemble
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Disassemble
New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393} New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393}
New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920} New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920}
2015/09/17 New Software Is Used for Certain 3500 Dynamic Gas Blending Well Service Engines {1250, 1280, 1920}
EMCP 4.4 Supervisory Control Panel Maintenance Interval Schedule
C13 Generator Set Maintenance Interval Schedule - Emergency Standby Power
SRMP Electric Power Generation SRMP Generator Exciter - Remove and Install
C13 Generator Set Maintenance Interval Schedule - Standby
C13 Generator Set Maintenance Interval Schedule - Prime Power
390F Excavator Stopping the Engine
G3606 and G3608 Engines Rocker Arm - Install
G3606 and G3608 Engines Gas Admission Valve - Remove
G3606 and G3608 Engines Gas Admission Valve - Install
G3606 and G3608 Engines Gas Needle Valve - Remove and Install
G3612 and G3616 Engines Prechamber Ignition Body - Remove
G3612 and G3616 Engines Cylinder Head - Remove
EMCP 4.4 Supervisory Control Panel Daily Inspection
EMCP4.2B Engine Cooldown Warning
EMCP4.2B Engine Oil Pressure Warning
EMCP4.2B Engine Overcrank Warning
EMCP4.2B Engine Speed Warning
EMCP4.2B Engine Overspeed Warning