Daily Inspection
For maximum service life of the control panel, perform a daily walk around inspection.
Look around the panel and under the panel. Look for trash buildup, dirt buildup, loose bolts, broken parts, cracked parts, or worn parts.
Visually inspect the inside of the control panel casing for dust and other debris that have accumulated inside the panel. Wipe the casing and components to prevent any obstruction .
Make sure that the cover and components are securely attached.
Check wiring for loose connections and replace any damaged wires.
Make all necessary repairs before you operate the system.
Caterpillar Information System:
G3612 and G3616 Engines Cylinder Head - Remove
G3612 and G3616 Engines Prechamber Ignition Body - Remove
G3606 and G3608 Engines Gas Needle Valve - Remove and Install
G3606 and G3608 Engines Gas Admission Valve - Install
G3606 and G3608 Engines Gas Admission Valve - Remove
G3606 and G3608 Engines Rocker Arm - Install
G3606 and G3608 Engines Rocker Arm - Remove
Inspect Inlet Check Valve and Clean Expansion Chamber Before Installing Replacement Air Compressor to Avoid Repeat Compressor Failure{1803, 5502} Inspect Inlet Check Valve and Clean Expansion Chamber Before Installing Replacement Air Compressor to Avoid Repeat Compressor Failure{1803, 5502}
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Assemble
794 AC Off-Highway Truck Machine Systems Control Valve (Hoist) - Disassemble
New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393} New Stats and Tube Routings are Now Used for Certain 3512 and 3516 Marine Engines {1355, 1380, 1393}
New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920} New Software Is Used for Certain 3500 Dynamic Gas Blending Land Electric Engines {1920}
EMCP4.2B Engine Cooldown Warning
EMCP4.2B Engine Oil Pressure Warning
EMCP4.2B Engine Overcrank Warning
EMCP4.2B Engine Speed Warning
EMCP4.2B Engine Overspeed Warning
EMCP4.2B Engine Underspeed Warning
EMCP4.3/4.4 Generator Control Not in Automatic Warning
EMCP4.3/4.4 Generator Output Sensing Circuit Fault
EMCP4.2B Generator Overcurrent Warning
EMCP4.2B Generator Overfrequency Warning
EMCP4.2B Generator Overvoltage Warning
EMCP4.2B Generator Reverse Power Warning