Cylinder Liner - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-8665     | Cylinder Liner Puller Gp     | 1     |
Start By:
- Remove the pistons and the connecting rods.
- Use Tooling (A) to remove cylinder liner (1) .
Show/hide table
Illustration 1 | g01005579 |
- Remove the O-ring seals from cylinder liner (1) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
B     | 5P-3975     | Rubber Lubricant     | 1     |
C     | 2P-8260     | Cylinder Liner Installer     | 1     |
- Install the O-ring seals on cylinder liner (1) .
Show/hide table
Illustration 2 | g01133518 |
- Apply Tooling (B) on the O-ring seals.
- Use Tooling (C) to install cylinder liner (1) .
Note: Refer to Testing and Adjusting, "Cylinder Liner Projection" for more information.
End By: Install the pistons and the connecting rods.
Caterpillar Information System:
C7.1 Marine Engine Fuel Rail Pressure Problem
C7.1 Commercial Marine Engine Fuel Filter Is Restricted
Assembly Procedure for the 797F Off-Highway Truck High Performance (HP) Body {0374, 7000, 7250, 7258, 7960} Assembly Procedure for the 797F Off-Highway Truck High Performance (HP) Body {0374, 7000, 7250, 7258, 7960}
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053} A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
C280 Marine Engines Exhaust Temperature Is High
C7.1 Commercial Marine Engine Exhaust Temperature Is High
C7.1 Commercial Marine Engine Engine Overspeeds
3500 Petroleum Engines and Petroleum Generator Sets Maintenance Interval Schedule
C4.4 Marine Generator Set Product Installation
C4.4 Marine Generator Set Fuel System - Prime
C7.1 Commercial Marine Engine Engine Has Mechanical Noise (Knock)
C4.4 Marine Generator Set Maintenance Interval Schedule
XQ2000 Power Module Product Lifting
XQ2000 Power Module Electronic Modular Control Panel 4 (EMCP 4)
C7.1 Commercial Marine Engine Fuel Temperature Is High
C7.1 Commercial Marine Engine Inlet Air Is Restricted
C7.1 Commercial Marine Engine Inlet Air Temperature Is High
C7.1 Marine Engine Intake Manifold Air Pressure Is Low
C7.1 Marine Engine Intake Manifold Air Temperature Is High
XQ2000 Power Module Refill Capacities
C7.1 Commercial Marine Engine Oil Contains Coolant
C280 Marine Engines Relay - Test - Power Mode Relay
2015/08/07 Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/09/04 Improved Crankshaft Rear Seals Are Used on Certain C13 Commercial Engines {1161}