C15 and C18 Engines Caterpillar


Engine Operation

Usage:

C18 BDN
Správný provoz a náležitá údržba jsou klíčovými faktory k dosažení maximální životnosti a hospodárnosti motoru. Pokud jsou dodržovány pokyny uvedené v Příručce pro provoz a údržbu, lze minimalizovat náklady a maximalizovat provozní životnost motoru.

Motor je možné provozovat ve jmenovitých otáčkách poté, co dosáhl provozní teploty. Motor dosáhne normální provozní teploty dříve při nízkých otáčkách motoru (ot/min) a za nízkého požadavku na výkon. Tento postup je efektivnější než chod motoru naprázdno bez zatížení. Motor by měl dosáhnout provozní teploty během několika minut.

Za chodu motoru je nutné často sledovat hodnoty na měřidlech a údaje zaznamenávat. Porovnávání údajů v průběhu času napomůže k určení normálních hodnot u každého měřidla. Porovnávání údajů v průběhu času také napomůže k odhalení abnormálních provozních tendencí. Podstatné změny v hodnotách je potřeba prošetřit.

Caterpillar Information System:

C280 Marine Engines Electronic Service Tool Does Not Communicate
C13, C15, and C18 Tier 4 Final Engines Event Codes
Installing the New Delta Pressure Lines on Certain Tier 4 Interim C9 To C18 Engines {108D} Installing the New Delta Pressure Lines on Certain Tier 4 Interim C9 To C18 Engines {108D}
Inspection of the Fan Drive Pulley and Belts{1357, 1358, 1359} Inspection of the Fan Drive Pulley and Belts{1357, 1358, 1359}
C7.1 Engines Engine Top Speed Is Not Obtained
C7.1 Engines Engine Stalls at Low RPM
C7.1 Engines Engine Shutdown Occurs Intermittently
C4.4 and C6.6 Engines Engine Overcrank Occurrence
C9 Marine Engines Overhaul (Major)
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
2015/01/06 Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
C7 Marine Engine Maintenance Interval Schedule - Commercial Ratings
2014/12/19 New Engine Software Is Available For Certain G3306B Engines {1920}
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter Temperature Is Low
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter Has Changed Regeneration Interval
2014/12/19 New Software for the Soot Reading Strategy on C7.1 Generator Set {1920}
C7.1 Engines Engine Vibration Is Excessive
C7.1 Engines Exhaust Has Excessive Black Smoke
3512E Land Electric Drive Plate Locations and Film Locations
C7.1 Engines Exhaust Has Excessive White Smoke
C7.1 Engines Exhaust System Contains Oil
3512E Land Electric Drive Engine Oil Level - Check
C280 Marine Engines Turbocharger Turbine Speed Is High
C7.1 Engines Exhaust Temperature Is High
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.