2014/12/19 Caterpillar


New Software for the Soot Reading Strategy on C7.1 Generator Set {1920}

Usage:

C7.1 MRP
Generator Set:
C7.1 (S/N: MRP1-1,101-127,129-583,603-627)

Description of Change: New engine software has been introduced to address an artificial soot rate increase that can shut down the power module while in operation. This situation will disconnect the customer load.

The new software also has the following effects:

  • Elimination of the 677-7 Start Relay Open Circuit diagnostic code.

  • Low speed regeneration can now continue when engine speed increases to 1600 rpm.

Refer to table 1 in order to view the existing and the new software part numbers.

Adaptable To:

Table 1
Existing Part Number     New Part Number    
432-1892     463-0955    
Install the new software. Refer to Troubleshooting, "Flash Programming" for the correct procedure.

After the software has been installed, the engine cooldown parameter must be changed to a value other than zero.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.