3512E Land Electric Drive Caterpillar


Plate Locations and Film Locations

Usage:

3512E BZ3
Cat engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.

Cat dealers need these numbers to determine the components that were included with the engine. This information permits accurate identification of replacement part numbers.

Serial Number Plate



Illustration 1g06214114
(1) Serial number plate

The Serial Number Plate is on the left side of the cylinder block near the rear of the engine.



Illustration 2g00123229
Serial Number Plate

The following information is stamped on the Serial Number Plate: engine serial number, model, and arrangement number.

Information Plate



Illustration 3g03773822
(2) Information Plate

The Information Plate is on the left side top surface of the cylinder block in front of the front cylinder head.



Illustration 4g03721882
Information Plate

The following information is stamped on the Information Plate: engine maximum altitude, horsepower, high idle rpm, full load rpm, fuel settings, and other information.

Emission Compliance Certification Film



Illustration 5g03773877
(3) Emission compliance certification film

The emission film is on top of the left rear valve cover.



Illustration 6g03724831
Sample emission compliance certification film for delegated final assembly.

DOC Serial Number Plate



Illustration 7g03774300
(1) DOC serial number plate

Caterpillar Information System:

C7.1 Engines Exhaust Has Excessive Black Smoke
C7.1 Engines Engine Vibration Is Excessive
2014/12/19 New Software for the Soot Reading Strategy on C7.1 Generator Set {1920}
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter Has Changed Regeneration Interval
C1.5 and C2.2 Industrial Engines Diesel Particulate Filter Temperature Is Low
2014/12/19 New Engine Software Is Available For Certain G3306B Engines {1920}
C15 and C18 Engines Engine Operation
C280 Marine Engines Electronic Service Tool Does Not Communicate
C13, C15, and C18 Tier 4 Final Engines Event Codes
Installing the New Delta Pressure Lines on Certain Tier 4 Interim C9 To C18 Engines {108D} Installing the New Delta Pressure Lines on Certain Tier 4 Interim C9 To C18 Engines {108D}
Inspection of the Fan Drive Pulley and Belts{1357, 1358, 1359} Inspection of the Fan Drive Pulley and Belts{1357, 1358, 1359}
C7.1 Engines Engine Top Speed Is Not Obtained
C7.1 Engines Exhaust Has Excessive White Smoke
C7.1 Engines Exhaust System Contains Oil
3512E Land Electric Drive Engine Oil Level - Check
C280 Marine Engines Turbocharger Turbine Speed Is High
C7.1 Engines Exhaust Temperature Is High
C4.4 and C7.1 Engines Fuel Consumption Is Excessive
3512E Land Electric Drive System Pressure Release
C4.4 and C7.1 Engines Fuel Contains Water
C7.1 Engines Fuel Rail Pressure Problem
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
C7.1 Engines Fuel Temperature Is High
C4.4 and C7.1 Engines Inlet Air Is Restricted
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.