Maintenance Interval Schedule - Standby
Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.
Coolant - Change
Coolant Extender (ELC) - Add
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Engine Crankcase Breather - Clean
Engine Oil - Change
Engine Oil Filter - Change
Fuel Analysis - Obtain
Fuel System - Prime
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Metal Particle Detector - Inspect/Clean
Walk-Around Inspection
Air Tank Moisture and Sediment - Drain
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Check/Clean
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Jacket Water Heater - Check
Engine Performance - Test
Aftercooler Core - Clean/Test
Air Starting Motor Lubricator Bowl - Clean
Alternator - Inspect
Barring Device - Lubricate
Belts - Inspect/Replace
Coolant Sample (Level 2) - Obtain
Coolant Temperature Regulator - Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Engine Protective Devices - Check
Engine Valve Lash and Bridge - Check
Engine Valve Rotators - Inspect
Exhaust Piping - Check
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Prelube Pump - Lubricate
Speed Sensor - Clean/Inspect
Starting Motor - Inspect
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Oil Temperature Regulator - Replace
Turbocharger - Inspect
Water Pump - Inspect
When Required
Centrifugal Oil Filter - InspectCoolant - Change
Coolant Extender (ELC) - Add
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Engine Crankcase Breather - Clean
Engine Oil - Change
Engine Oil Filter - Change
Fuel Analysis - Obtain
Fuel System - Prime
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Metal Particle Detector - Inspect/Clean
Every Service Hour
Trend Data - RecordDaily
Coolant Level - CheckWalk-Around Inspection
Every Week
Air Starting Motor Lubricator Oil Level - CheckAir Tank Moisture and Sediment - Drain
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Check/Clean
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Jacket Water Heater - Check
Every 10 to 14 Days
Air Shutoff - TestEngine Performance - Test
Every 6 Months
Coolant Sample (Level 1) - ObtainEvery Year
Aftercooler Condensation - DrainAftercooler Core - Clean/Test
Air Starting Motor Lubricator Bowl - Clean
Alternator - Inspect
Barring Device - Lubricate
Belts - Inspect/Replace
Coolant Sample (Level 2) - Obtain
Coolant Temperature Regulator - Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Engine Protective Devices - Check
Engine Valve Lash and Bridge - Check
Engine Valve Rotators - Inspect
Exhaust Piping - Check
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Prelube Pump - Lubricate
Speed Sensor - Clean/Inspect
Starting Motor - Inspect
Every 3 Years
Camshaft Roller Followers - InspectCrankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Oil Temperature Regulator - Replace
Turbocharger - Inspect
Water Pump - Inspect
Caterpillar Information System:
3512E Land Electric Drive Engine Electronics
C4.4 and C6.6 Engines Coolant Temperature Is High
3512E HD Petroleum Engine Model View Illustrations
C13 Generator Set Engine Catalyst (SCR) - Remove and Install
3512E HD Petroleum Engine Safety Messages
C280 Marine Engines Cat ET Service Error Identifiers
C280 Marine Engines Coolant Contains Oil
C13 Generator Set Engine Exhaust Manifold - Remove and Install
390F Excavator Machine System Pump Control (Output Flow) - Test - One Pump Calibration
C280-16 Engine Alternator - Inspect
3512E Land Electric Drive Fuel System Primary Filter - Replace
C8.7 Marine Engines Crankshaft
3512E Land Electric Drive Product Description
C280-16 Engine Maintenance Interval Schedule - Station Black Out
3512E Land Electric Drive Declaration of Conformity
3512E Land Electric Drive Product Lifting
3512E Land Electric Drive Fuel Related Components in Cold Weather
3512E Land Electric Drive Refill Capacities
3512E Land Electric Drive Fluid Recommendations
3512E Land Electric Drive Engine Oil - Change
C4.4 and C6.6 Engines Cooling Fan Is Always ON
3512E Land Electric Drive Maintenance Recommendations
3512E Land Electric Drive Overhaul (Top End)
3512E Land Electric Drive Starting Motor - Inspect