Declaration of Conformity
Show/hide table
An EU Declaration of Conformity document was provided with the product if the product was manufactured to comply with specific requirements for the European Union. To determine the details of the applicable Directives, review the complete EU Declaration of Conformity provided with the product. The extract shown below from an EU Declaration of Conformity for product that is declared compliant to "2006/42/EC" applies only to those products originally "CE" marked by the manufacturer listed and which have not since been modified. | ||||||
EU DECLARATION OF CONFORMITY OF MACHINERY | ||||||
Manufacturer:CATERPILLAR INC. 100 N.E. ADAMS STREET PEORIA, IL 61629 USA | ||||||
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request: | ||||||
Standards & Regulations Manager,Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France |
||||||
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder | ||||||
Description: | Generic Denomination: | Diesel Engine | ||||
Function: | Land Electric Drilling | |||||
Model/Type: | 3512E | |||||
Serial Number: | ||||||
Commercial Name: | Caterpillar | |||||
Fulfills all the relevant provisions of the following Directives | ||||||
Directives | Notified Body | Document No. | ||||
2006/42/EC | N/A | |||||
2006/95/EC | N/A | |||||
2004/108/EC | N/A | |||||
2000/14/EC amended by 2005/88/EC, Note (1) | Note (2) | |||||
Note (1) | Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File |
|||||
Note (2) | Notified body name and address | |||||
Done at: | Signature | |||||
Date: | Name/Position | |||||
Note: The above information was correct as of October, 2009, but may be subject to change. Refer to the individual declaration of conformity issued with the machine for exact details. |
Caterpillar Information System:
C280-16 Engine Maintenance Interval Schedule - Station Black Out
3512E Land Electric Drive Product Description
C280-16 Engine Maintenance Interval Schedule - Standby
3512E Land Electric Drive Engine Electronics
C4.4 and C6.6 Engines Coolant Temperature Is High
3512E HD Petroleum Engine Model View Illustrations
C13 Generator Set Engine Catalyst (SCR) - Remove and Install
3512E HD Petroleum Engine Safety Messages
C280 Marine Engines Cat ET Service Error Identifiers
C280 Marine Engines Coolant Contains Oil
C13 Generator Set Engine Exhaust Manifold - Remove and Install
390F Excavator Machine System Pump Control (Output Flow) - Test - One Pump Calibration
3512E Land Electric Drive Product Lifting
3512E Land Electric Drive Fuel Related Components in Cold Weather
3512E Land Electric Drive Refill Capacities
3512E Land Electric Drive Fluid Recommendations
3512E Land Electric Drive Engine Oil - Change
C4.4 and C6.6 Engines Cooling Fan Is Always ON
3512E Land Electric Drive Maintenance Recommendations
3512E Land Electric Drive Overhaul (Top End)
3512E Land Electric Drive Starting Motor - Inspect
C13 Generator Set Engine Diesel Particulate Filter - Remove and Install
XQ570 Rental Generator Set Selective Catalytic Reduction Warning System
2014/12/12 A New Torque Value for the Flywheel Group Is Used on Certain C18 Engines {1156}