Crankshaft
Show/hide table
Illustration 1 | g03753978 |
Show/hide table
Specification for 431-4143 Crankshaft     | |||
Item     | Qty     | Parts     | Specification Description     |
Refer to Specifications, "Connecting Rod Bearing Journal" and Specifications, "Main Bearing Journal" for more information about the crankshaft journals.     | |||
For the correct procedure on measuring for a bent crankshaft, refer to the Guideline for Reusable Parts and Salvage Operations, SEBF8054, "Procedure to Measure and Straighten Bent Crankshafts".     | |||
1     | 1     | 430-8915 Dowel     | Protrusion of the dowel from the surface of the crankshaft is 3.0 ± 0.5 mm (0.12 ± 0.02 inch).     |
2     | 4     | 431-7706 Bearings     | Thrust plates to be used only on rear main bearing. End play of the crankshaft is 0.11 to 0.23 mm (0.004 to 0.009 inch). The maximum permissible end play with used bearings is 0.11 to 0.23 mm (0.004 to 0.009 inch). Thickness is 3.38 mm (0.133 inch) to 3.43 mm (0.135 inch).     |
Caterpillar Information System:
C13 Generator Set Engine Relay (ARD Nozzle Heater) - Remove and Install
C4.4 Engines Coolant Level Is Low
C4.4 and C7.1 Engines Coolant Contains Oil
2014/12/05 New Exhaust Shield Assemblies Are Now Available on Certain G3520C Engines {1059}
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0673 - FMI 07
2014/11/21 New Monitor Software Gp Is Now Used on Certain C18, and C32 Marine Engines {7490, 7620}
C13 Generator Set Engine Combustion Head - Remove and Install
C13 Generator Set Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0585 - FMI 07
C13 Generator Set Engine Voltage Control (Load Protection) - Remove and Install
C18 Fire Pump Engine Maintenance Interval Schedule
C7.1 Engines Battery Problem
3512E Land Electric Drive Fuel System Primary Filter - Replace
C280-16 Engine Alternator - Inspect
390F Excavator Machine System Pump Control (Output Flow) - Test - One Pump Calibration
C13 Generator Set Engine Exhaust Manifold - Remove and Install
C280 Marine Engines Coolant Contains Oil
C280 Marine Engines Cat ET Service Error Identifiers
3512E HD Petroleum Engine Safety Messages
C13 Generator Set Engine Catalyst (SCR) - Remove and Install
3512E HD Petroleum Engine Model View Illustrations
C4.4 and C6.6 Engines Coolant Temperature Is High
3512E Land Electric Drive Engine Electronics
C280-16 Engine Maintenance Interval Schedule - Standby