A New Hazardous Location Customer Connection Harness Is Available for Certain C9, C15, and C32 Commercial Engines {1408, 1900}
- Engine:
- C15 (S/N: HAZ502-508,513-538,543-573,576-600,602-607,611-614,617-624,627-633,635-637,640-644,647-650,652-656,659-659,666-679,684-694,703-707,712-714,717-717,722-728,733-741,746-750,754-756,758-774,776-777)
- Petroleum Engine:
- C32 (S/N: B2C274-275,282-306,309-309,311-313,315-315,317-321)
- Petroleum Power Train Package:
- C15P (S/N: PGN154-155,157-157)
- C9 (S/N: P9L420-420,428-429,432-434,437-438,442-442,452-455,469-469,472-474,477-478,484-490,497-498,541-544,551-551,554-554,557-557,560-562,569-570,575-583,587-588,605-613,617-617,621-627,629-632; P9W101-103,110-110,128-129)
The auxiliary pressure sensor on the 367-9759 Customer Connection Harness As, change level 00 through 04 (without deviation ANR 1611), is wired to 8VDC instead of the sensor required 5VDC. The digital return line was used for this sensor, an analog return must be used.
Show/hide table
Illustration 1 | g03739640 |
"ANR code (deviation number)" |
Note: Any 367-9759 Customer Connection Harness As that has a part number tag with "ANR CODE: 1611" visible does not need to be replaced. Refer to Illustration 1 for the location of the deviation number.
The new 461-6552 Customer Connection Harness As replaces the existing 367-9759 Customer Connection Harness As on the serial numbers listed above.
Refer to Table 1 for a list of parts required to install the new harness assembly.
Show/hide table
New Part Number     | Description     | Quantity     |
320-3064     | Pressure Sensor Gp     | 1     |
364-7964     | Wiring Kit     | 1     |
461-6552     | Customer Connection Harness As     | 1     |
5P-7814     | O-Ring Seal     | 1     |
Caterpillar Information System:
C13 Industrial Engine Fuel Pressure Is High
C13 Industrial Engine Fuel Consumption Is Excessive
C13 Industrial Engine Exhaust Temperature Is High
C13 Industrial Engine Exhaust System Contains Oil
3500 Generator Sets Maintenance Interval Schedule - High Displacement
3500 Generator Sets Maintenance Interval Schedule - Prime Power
793F Off-Highway Truck Fuel Correction Factor - Set
2014/11/14 New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat® Products {4490, 7620}
3500 Generator Sets Maintenance Interval Schedule - Standby
Installation Procedure to Retrofit a 471-1985 Swivel Guard Upgrade Kit on Certain Excavators {7153} Installation Procedure to Retrofit a 471-1985 Swivel Guard Upgrade Kit on Certain Excavators {7153}
C4.4 Engines General Information
3512E Tier 4 Final Engines for Land Electric Drilling Sensor Signal (Analog, Active) - Test
C13 Industrial Engine Fuel Temperature Is High
C13 Industrial Engine Idle Speed Is High
C13 Industrial Engine Inlet Air Is Restricted
C13 Industrial Engine Intake Manifold Air Temperature Is High
C13 Industrial Engine NOx Conversion Is Low
C13 Industrial Engine NRS Exhaust Gas Temperature Is High
C13 Industrial Engine Oil Consumption Is Excessive
2014/12/12 New Compressor Bypass Valves and Software Are Used on Certain G3500 Engines {1803, 1920, 5510}
C280 Marine Engines Dosing Control System Operation
C280-08 Tier 4 Engine Engine Oil Filler and Oil Level Gauge - Remove and Install
C280 Marine Engines Diesel Exhaust Fluid Quality - Test
C13 Industrial Engine Oil Contains Coolant