J1939 Code and Description | CDL Code and Description | Comments |
---|---|---|
95-2
Engine Fuel Filter Differential Pressure : Erratic, Intermittent, or Incorrect |
95-2
Fuel Filter Differential Pressure Sensor : Erratic, Intermittent, or Incorrect |
The value of the parameter is set to a default value.
The code is logged. |
99-2
Engine Oil Filter Differential Pressure : Erratic, Intermittent, or Incorrect |
99-2
Engine Oil Filter Differential Pressure Sensor : Erratic, Intermittent, or Incorrect |
The value of the parameter is set to a default value.
The code is logged. |
100-3
Engine Oil Pressure : Voltage Above Normal |
100-3
Engine Oil Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
100-4
Engine Oil Pressure : Voltage Below Normal |
100-4
Engine Oil Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
101-3
Engine Crankcase Pressure : Voltage Above Normal |
101-3
Crankcase Air Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
101-4
Engine Crankcase Pressure : Voltage Below Normal |
101-4
Crankcase Air Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
108-3
Barometric Pressure : Voltage Above Normal |
3528-3
Barometric Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
108-4
Barometric Pressure : Voltage Below Normal |
3528-4
Barometric Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
109-3
Engine Coolant Pressure : Voltage Above Normal |
2302-3
Engine Coolant Pump Outlet Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
109-4
Engine Coolant Pressure : Voltage Below Normal |
2302-4
Engine Coolant Pump Outlet Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
157-3
Engine Injector Metering Rail #1 Pressure : Voltage Above Normal |
1797-3
Fuel Rail Pressure Sensor : Voltage Above Normal |
The engine power is derated to a default torque map while the code is active.
The code is logged. |
157-4
Engine Injector Metering Rail #1 Pressure : Voltage Below Normal |
1797-4
Fuel Rail Pressure Sensor : Voltage Below Normal |
The engine power is derated to a default torque map while the code is active.
The code is logged. |
411-3
Engine Exhaust Gas Recirculation Differential Pressure : Voltage Above Normal |
3387-3
EGR Differential Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
411-4
Engine Exhaust Gas Recirculation Differential Pressure : Voltage Below Normal |
3387-4
EGR Differential Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
1176-3
Engine Turbocharger #1 Compressor Inlet Pressure : Voltage Above Normal |
2738-3
Turbocharger #1 Compressor Inlet Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
1176-4
Engine Turbocharger #1 Compressor Inlet Pressure : Voltage Below Normal |
2738-4
Turbocharger #1 Compressor Inlet Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
1177-3
Engine Turbocharger #2 Compressor Inlet Pressure : Voltage Above Normal |
2739-3
Turbocharger #2 Compressor Inlet Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
1177-4
Engine Turbocharger #2 Compressor Inlet Pressure : Voltage Below Normal |
2739-4
Turbocharger #2 Compressor Inlet Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
1208-3
Engine Pre-filter Oil Pressure : Voltage Above Normal |
542-3
Engine Oil Pressure Sensor - Before Oil Filter : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
1208-4
Engine Pre-filter Oil Pressure : Voltage Below Normal |
542-4
Engine Oil Pressure Sensor - Before Oil Filter : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
1381–2
Engine Fuel Supply Pump Inlet Pressure : Erratic, Intermittent, or Incorrect |
2247–2
Fuel Transfer Pump Intake Pressure Sensor : Erratic, Intermittent, or Incorrect |
The value of the parameter is set to a default value.
The code is logged. |
1381-3
Engine Fuel Supply Pump Inlet Pressure : Voltage Above Normal |
2247-3
Fuel Transfer Pump Intake Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
1381-4
Engine Fuel Supply Pump Inlet Pressure : Voltage Below Normal |
2247-4
Fuel Transfer Pump Intake Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
3358-3
Engine Exhaust Gas Recirculation Inlet Pressure : Voltage Above Normal |
3385-3
EGR Intake Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
3358-4
Engine Exhaust Gas Recirculation Inlet Pressure : Voltage Below Normal |
3385-4
EGR Intake Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
3563-3
Engine Intake Manifold #1 Absolute Pressure : Voltage Above Normal |
1785-3
Intake Manifold Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
3563-4
Engine Intake Manifold #1 Absolute Pressure : Voltage Below Normal |
1785-4
Intake Manifold Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
5417-3
Fuel Filter (Suction Side) Intake Pressure : Voltage Above Normal |
4594-3
Electric Fuel Transfer Pump Outlet Pressure Sensor : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
5417-4
Fuel Filter (Suction Side) Intake Pressure : Voltage Below Normal |
4594-4
Electric Fuel Transfer Pump Outlet Pressure Sensor : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
5578-3
Engine Fuel Delivery Absolute Pressure : Voltage Above Normal |
289-3
Fuel Pressure Sensor - Before Fuel Filter : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
5578-4
Engine Fuel Delivery Absolute Pressure : Voltage Below Normal |
289-4
Fuel Pressure Sensor - Before Fuel Filter : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
5580-3
Engine Filtered Fuel Delivery Absolute Pressure : Voltage Above Normal |
460-3
Fuel Pressure Sensor - After Fuel Filter : Voltage Above Normal |
The value of the parameter is set to a default value.
The code is logged. |
5580-4
Engine Filtered Fuel Delivery Absolute Pressure : Voltage Below Normal |
460-4
Fuel Pressure Sensor - After Fuel Filter : Voltage Below Normal |
The value of the parameter is set to a default value.
The code is logged. |
5708-3
Engine Coolant Pressure #2 : Voltage Above Normal |
N/A | The value of the parameter is set to a default value.
The code is logged. |
5708-4
Engine Coolant Pressure #2 : Voltage Below Normal |
N/A | The value of the parameter is set to a default value.
The code is logged. |
The supply voltage is routed to terminal 1 of each sensor connector. The sensor return is routed to terminal 2 of each sensor connector. The sensor signal is routed to terminal 3 of each sensor connector. The Electronic Control Module (ECM) provides short circuit protection for the internal power supply. A short circuit to the battery will not damage the internal power supply.
Diagnostics on the Cat® Electronic Technician (ET)
Wiggle Test - The Wiggle Test allows you to monitor the status of the signals from the sensors.
For additional information regarding the Wiggle Test, refer to the documentation that accompanies the Cat ET software.
Illustration 1 | g06081193 |
Troubleshooting Test Steps | Values | Results |
---|---|---|
1. Check for Codes A. Connect Cat® Electronic Technician (ET) to the service tool connector. B. Determine if a code is active or logged. |
Codes |
Result: A -3 code is active. Proceed to Test Step 2. Result: A -4 code is active. Proceed to Test Step 3. |
2. Create a Short at the Sensor Connector A. Turn the keyswitch to the OFF position. B. Disconnect the sensor with the active -3 code. C. Install the jumper wire between the following terminals at the sensor connector: - Terminal 3 (signal) and Terminal 2 (sensor return) D. Connect Cat ET. E. Use Cat ET to monitor the following: - -4 code F. Turn the keyswitch to the OFF position. |
Create a Short |
Result: A -4 code did not become active. Proceed to Test Step 4. Result: A -4 code became active. Repair: The wiring harness is OK. Replace the sensor. Verify that the repair eliminated the problem. |
3. Create an Open at the Sensor Connector A. Turn the keyswitch to the OFF position. B. Disconnect the sensor with the active -4 code. C. Connect Cat ET. D. Use Cat ET to monitor the following: - -3 code E. Turn the keyswitch to the OFF position. |
Create an Open |
Result: A -3 code did not become active. Proceed to Test Step 4. Result: A -3 code became active. Repair: The wiring harness is OK. Replace the sensor. Verify that the repair eliminated the problem. |
4. Check the 5 VDC Supply Voltage at the Sensor Connector A. Turn the keyswitch to the ON position. B. Measure the voltage at the sensor connector between the following pins: - Pin 1 and Pin 2 C. Reconnect the sensor. |
5.0 ± 0.2 VDC |
Result: The supply voltage is approximately 5.0 ± 0.2 VDC. Proceed to Test Step 5. Result: The supply voltage is not approximately 5.0 ± 0.2 VDC. Repair:There is a short in the wiring harness to the battery. Repair or replace the wiring harness. If the problem is not resolved, proceed to Test Step 5. |
5. Perform the Wiggle Test Carefully following this procedure is the best way to identify the root cause of an intermittent problem. A. Connect Cat ET. B. Use CAT ET to perform the following test: - "Wiggle Test" C. Slowly wiggle the wiring and the connectors between the P2 connector and the sensor. Pay particular attention to the wiring near each connector. Be sure to wiggle all the wiring. As you wiggle the wiring look for these problems: - Loose connectors or damaged connectors - Moisture on the connectors or the wiring - Damaged that is caused by excessive heat - Damage that is caused by chafing - Improper routing of wiring - Damaged insulation |
Test |
Result: The wiring failed the Wiggle Test. Repair: There is a problem with the wiring harness. Repair or replace the wiring harness. Verify that the repair eliminated the problem. Result: The wiring passed the Wiggle Test. Repair: The problem may be intermittent. Inspect the wiring harness. Refer to Troubleshooting, "Electrical Connectors - Inspect" for additional information. If the wiring looks OK, perform the following procedure: 1. Turn the keyswitch to the OFF position. 2. Disconnect the connectors. Carefully inspect the terminals for proper installation. Make sure that each terminal is clean and dry. 3. Insert a pin into each socket. Verify that each socket grips the pin firmly. Repair any problems. 4. Connect all connectors. 5. Verify that the repair eliminated the problem. |
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).