XQC1200 Power Module Caterpillar


Fan Motor - Lubricate

Usage:

XQC1200 ME9


Illustration 1g03723118
Location of the grease fitting for the fan motor


Illustration 2g03740287
Location of the grease fitting for the drive end of the fan motor

The unit is equipped with two radiator fans with electric motors for the fan drives. Each motor has two grease fittings that require service, one for each bearing. Do not mix different types of grease. If the engine is operated in severe conditions, more frequent lubrication of the bearings may be necessary. The following examples are considered to be severe conditions: hot environments, dirty environments and humid environments.

Stop the generator set. Use a Cat® 8F-9866 Grease Gun or equivalent grease gun to grease the fan motor.

Use only the grease recommended in this Operation and Maintenance Manual, "Fluid Recommendations". Use 17 g (0.61 oz) of the recommended grease to grease the bearings.

Caterpillar Information System:

C0.5 and C0.7 Industrial Engines Severe Service Application
3516E Generator Set Engine Aftercooler - Two Stage Aftercooler
2015/02/10 New Bearings with a Reduced Inside Diameter are Available for the Elimination of Radial Play in the Front Linkage for Certain D Series and E Series Excavators, Forest Machines, and Mobile Hydraulic Power Units {6513}
C7.1 Marine Engine Exhaust Manifold
C7.1 Marine Engine Fuel Manifold (Rail)
C7.1 Marine Engine Fuel Filter Base
C7.1 Marine Engine Fuel Injection Lines
C7.1 Marine Engine Turbocharger
C7.1 Marine Engine Flywheel
C7.1 Marine Engine Flywheel Housing
C3.4B Engines Electrical Power Supply - Test
3516C and C175-16 Engines Selective Catalytic Reduction Configuration Parameters
XQ2000 Power Module Fuel Tank Strainer - Clean
XQ125 Generator Set Clean Emissions Module Support - Inspect
C4.4 Engines for Caterpillar Built Machines Fuel Injection
C3.4B Engines Glow Plug Starting Aid - Test
2015/07/17 A New Bracket Is Used to Mount the Boost Pressure Sensor on Certain Marine 3500C Engines {1408, 1439}
3512E Land Electric Drive Maintenance Interval Schedule
2014/09/16 New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/11 Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
2014/09/12 Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Petroleum Engines {3160}
C7.1 Marine Engine Exhaust Temperature Sensor
2014/09/12 Cat® Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
C18 Fire Pump Engine Product Description
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.