Fuel Manifold (Rail)
Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.
Show/hide table
| NOTICE |
|---|
Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
Show/hide table
 | |
| Illustration 1 | g02293653 |
Typical example | |
(1) Tighten the bolts to the following torque. ... 28 N·m (248 lb in)
(2) Tighten the bolts to the following torque. ... 10 N·m (89 lb in)
(3) Tighten the fuel pressure relief valve to the following torque. ... 30 N·m (22 lb ft)
Note: The fuel pressure relief valve (3) should be tightened an additional 24 degrees.
Caterpillar Information System:
C7.1 Marine Engine Fuel Filter Base
C7.1 Marine Engine Fuel Injection Lines
C7.1 Marine Engine Turbocharger
C7.1 Marine Engine Flywheel
C7.1 Marine Engine Flywheel Housing
C3.4B Engines Electrical Power Supply - Test
3516C and C175-16 Engines Selective Catalytic Reduction Configuration Parameters
CAT Water Delivery System (WDS) and 777G WTR OEM Off-Highway Truck/Tractor Pump Drive - Assemble
C18 Fire Pump Engine Model View Illustrations
C18 Fire Pump Engine Engine Electronics
Air Conditioning and Heating R134a for All Caterpillar Machines General Troubleshooting Information
Air Conditioning and Heating R134a for All Cat Machines General Information
C7.1 Marine Engine Exhaust Manifold
2015/02/10 New Bearings with a Reduced Inside Diameter are Available for the Elimination of Radial Play in the Front Linkage for Certain D Series and E Series Excavators, Forest Machines, and Mobile Hydraulic Power Units {6513}
3516E Generator Set Engine Aftercooler - Two Stage Aftercooler
C0.5 and C0.7 Industrial Engines Severe Service Application
XQC1200 Power Module Fan Motor - Lubricate
XQ2000 Power Module Fuel Tank Strainer - Clean
XQ125 Generator Set Clean Emissions Module Support - Inspect
C4.4 Engines for Caterpillar Built Machines Fuel Injection
C3.4B Engines Glow Plug Starting Aid - Test
2015/07/17 A New Bracket Is Used to Mount the Boost Pressure Sensor on Certain Marine 3500C Engines {1408, 1439}
3512E Land Electric Drive Maintenance Interval Schedule
2014/09/16 New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}