1999/08/01 Caterpillar


New Material Improved Durability For STAY CLEAN VALVE(r) In Caterpillar High Efficiency Fuel Filters{1262}

Usage:


All Caterpillar Diesel Truck Engines

Reference: Truck Engine News, April 1999, Page 1, "New Caterpillar High Efficiency Fuel Filters with STAY CLEAN VALVES(r) Replace All Standard Fuel Filters in February Of 1999"

The Reference Article introduced the Caterpillar High Efficiency Fuel Filters equipped with STAY CLEAN VALVES(r). The STAY CLEAN VALVES(r) are now made from a different material which results in improved durability. The new valve material is WHITE, while the former valve material was BLACK. The part numbers of the Caterpillar High Efficiency Fuel Filters with the new WHITE STAY CLEAN VALVES(r) have not changed. Use the chart as a cross reference for the new and former fuel filter part numbers.

The STAY CLEAN VALVES(r) will prevent unfiltered fuel, which may contain abrasive contaminants, from entering the clean side of the fuel filter. Unfiltered fuel may cause damage to the engine's fuel system. IT IS IMPORTANT TO PRIME, AND NOT PREFILL, REPLACEMENT FILTERS IN ORDER TO ENSURE THAT FUEL SYSTEMS RECEIVE FILTERED FUEL ONLY.

Caterpillar Information System:

1999/08/01 New Service Manuals And Revised Service Manuals Available{0374,1000}
1999/07/01 New Software Release{1920}
1999/07/01 Special Instructions Are Now Available For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated, Eliminating Inlet Regulating Valve And Related Maintenance{1803}
1999/07/01 New Stronger Bolts And Washers Help Prevent Oil Leaks At Rear Power Take-Off (RPTO) Flywheel Housing To Block Joint{1157}
1999/07/01 New Spacer Base Allows Use Of New Integral Valve Cover Seal{1107,1119,1120}
1999/06/01 Cat I.D. Version 2.1 Personality Module Now Available{1920}
1999/06/01 New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release{0781,1920}
1999/05/01 Updated Software For 1998 And Earlier 3406E Truck Engines Now Available {1920}
1999/05/01 Revised Removal And Installation Procedure For The 133-7101 Sensor Plate Assembly {1905}
1999/05/01 Be Sure To Perform The Unit Injector Adjustment At The Initial Valve Lash Adjustment {1290}
1999/05/01 Jake Brake Settings For The 3406E Truck Engines {1119}
1999/05/01 A New Special Instruction Is Available To Help Determine The Reusability Of Camshafts In 3406E Truck Engines {0374,1210}
1999/08/01 Extended Life Coolant - Still The Coolant Of Choice{1395}
1999/08/01 Special Instruction Now Available For Correcting Speed Surges{1408}
1999/09/01 New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01 Peterbilt OEM Engine Wiring Harness And Related Components{1408}
1999/09/01 New Engine Flash Files Available To Allow Use Of The "Auto Retarder In Cruise" Feature With Eaton AutoShift Transmissions{1920}
1999/10/01 ADEM III And ADEM 2000 Test Electronic Control Module (ECM) {1901}
1999/10/01 3126B Software Defect For Injection Actuation Pressure Driver Test {1920}
1999/10/01 Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01 Improved Jake Brake Solenoids For 1999 3406E Truck Engines {1119}
1999/10/01 Optional Service Replacement Aluminum Piston Cylinder Kit Available {1241,1331}
1999/11/01 EPA Required Low NOx Rebuild Kits On Overhauled Engines{1290}
1999/11/01 138-8440 Component Cleaner May Damage Electrical Connectors{0644}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.