C3.4B Engines for Caterpillar Built Machines Caterpillar


Temperature Sensor (DOC Inlet)

Usage:

CCS7 4B2


Illustration 1g03703549
Typical example

(1) Tighten the temperature sensor to the following torque. ... 45 N·m (33 lb ft)

Caterpillar Information System:

330F MHPU Mobile Hydraulic Power Unit Circuit Breakers - Reset
2014/07/25 An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
G3500 Engines Maintenance Interval Schedule - Naturally Aspirated
G3500 Engines Maintenance Interval Schedule - Bio-Gas
2014/07/22 An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
G3500 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
G3500 Engines Maintenance Interval Schedule - Standby
2014/07/25 New Auxiliary Water Pump and Shaft Seal for Certain 3056 Marine Engines and C1.5, C2.2, C4.4, and C6.6 Generator Sets {1371, 1371, 7555}
C3.4B Engines Service Tool Features
3516C and C175-16 Engines Selective Catalytic Reduction SCR Warning System Problem
C8.7 Marine Engine Engine Valve Lash - Check
XQC1200 and XQC1600 Power Modules Engine Oil Filter Housing - Assemble
C3.4B Engines for Caterpillar Built Machines Inlet Manifold Temperature and Pressure Sensor
3516B Generator Set Engines with Dynamic Gas Blending Aftercooler Coolant Temperature Is High
2014/07/25 New Engine Software Is Used on Certain C18 Marine Engines {1901, 1920}
PM820, PM822, and PM825 Cold Planer Safety Messages
C280 Marine Engines Engine Cranks but Does Not Start
C280 Marine Engines Engine Has Mechanical Noise (Knock)
2014/07/25 Improved Design For Battery Charger Is Now Used On Certain Generator Sets {751B}
C3.4B Engines Injector Code - Calibrate
C8.7 Marine Engines Closed Crankcase Ventilation (CCV) System
G3500 Generator Sets Maintenance Interval Schedule - Standby
G3500 Generator Sets Maintenance Interval Schedule - Bio Gas
G3500 Generator Sets Maintenance Interval Schedule - Well Head Natural Gas
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.