Inlet Manifold Temperature and Pressure Sensor
Show/hide table
Illustration 1 | g03703564 |
Typical example |
(1) Tighten the screw for the inlet manifold air pressure and temperature sensor to the following torque. ...
Caterpillar Information System:
C3.4B Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
330F MHPU Mobile Hydraulic Power Unit Circuit Breakers - Reset
2014/07/25 An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
G3500 Engines Maintenance Interval Schedule - Naturally Aspirated
G3500 Engines Maintenance Interval Schedule - Bio-Gas
2014/07/22 An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
G3500 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
G3500 Engines Maintenance Interval Schedule - Standby
2014/07/25 New Auxiliary Water Pump and Shaft Seal for Certain 3056 Marine Engines and C1.5, C2.2, C4.4, and C6.6 Generator Sets {1371, 1371, 7555}
C3.4B Engines Service Tool Features
3516C and C175-16 Engines Selective Catalytic Reduction SCR Warning System Problem
C8.7 Marine Engine Engine Valve Lash - Check
3516B Generator Set Engines with Dynamic Gas Blending Aftercooler Coolant Temperature Is High
2014/07/25 New Engine Software Is Used on Certain C18 Marine Engines {1901, 1920}
PM820, PM822, and PM825 Cold Planer Safety Messages
C280 Marine Engines Engine Cranks but Does Not Start
C280 Marine Engines Engine Has Mechanical Noise (Knock)
2014/07/25 Improved Design For Battery Charger Is Now Used On Certain Generator Sets {751B}
C3.4B Engines Injector Code - Calibrate
C8.7 Marine Engines Closed Crankcase Ventilation (CCV) System
G3500 Generator Sets Maintenance Interval Schedule - Standby
G3500 Generator Sets Maintenance Interval Schedule - Bio Gas
G3500 Generator Sets Maintenance Interval Schedule - Well Head Natural Gas
Product Link® E640 System Installation Parameters Configure