C8.7 Marine Engines Caterpillar


Closed Crankcase Ventilation (CCV) System

Usage:

C8.7 CS7



Illustration 1g03703525

(1) Crankcase breather

(2) Oil return

(3) Air cleaner

(4) CCV filter

This engine is equipped with a Closed Crankcase Ventilation System (CCV) that is used for capturing fumes. Fumes from the rear crankcase travel through the camshaft and exit the engine through the crankcase breather located at the front of the engine. The fumes from the crankcase breather are collected in the CCV. The engine oil is separated from the fumes from the crankcase in the filter. The engine oil collects in the filter and drains back to the crankcase through a drain line in the bottom of the filter. The fumes from the crankcase are directed back into the compressor inlet in order to be consumed by the engine.

Higher crankcase pressures will tend to create oil leaks. If the filter becomes plugged the engine will not be able to relieve the crankcase pressure. The plugged filter will cause the engine to develop external oil leaks. For more information, refer to the OMM, "Closed Crankcase Ventilation (CCV) System Fumes Disposal Filter - Replace".

Caterpillar Information System:

C3.4B Engines Injector Code - Calibrate
2014/07/25 Improved Design For Battery Charger Is Now Used On Certain Generator Sets {751B}
C280 Marine Engines Engine Has Mechanical Noise (Knock)
C280 Marine Engines Engine Cranks but Does Not Start
PM820, PM822, and PM825 Cold Planer Safety Messages
2014/07/25 New Engine Software Is Used on Certain C18 Marine Engines {1901, 1920}
3516B Generator Set Engines with Dynamic Gas Blending Aftercooler Coolant Temperature Is High
C3.4B Engines for Caterpillar Built Machines Inlet Manifold Temperature and Pressure Sensor
C3.4B Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
330F MHPU Mobile Hydraulic Power Unit Circuit Breakers - Reset
2014/07/25 An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
G3500 Engines Maintenance Interval Schedule - Naturally Aspirated
G3500 Generator Sets Maintenance Interval Schedule - Standby
G3500 Generator Sets Maintenance Interval Schedule - Bio Gas
G3500 Generator Sets Maintenance Interval Schedule - Well Head Natural Gas
Product Link® E640 System Installation Parameters Configure
CX31 On-Highway Transmission Oil Filter (Transmission)
C4.4 Engines SCR Warning System Problem
2014/12/17 A New Main Hydraulic Pump is Now Used on Certain 345D and 349D Excavators and Mobile Hydraulic Power Units {507G, 5084}
C27 and C32 Engines for Caterpillar Built Machines Fuel Transfer Pump
C11 and C13 Engines Fuel Filter Base
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Remove and Install
PM820, PM822, and PM825 Cold Planer Fire Extinguisher Location
C8.7 Marine Engine General Hazard Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.