Water Temperature Regulators - Remove and Install - Auxiliary Water System
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 221-8647 | Driver | 1 |
- Drain the auxiliary water system. Refer to Operation and Maintenance Manual, "Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03688033 - Remove manifold (1).
Show/hide table
Illustration 2 g03688036 Parts removed for clarity - Remove water temperature regulators (2).
Show/hide table
Illustration 3 g03688037 Parts removed for clarity - Remove lip seals (3).
- Install water temperature regulators (2) in the reverse order of removal.
- Use Tooling (A) to install lip seals (3).
Caterpillar Information System:
C8.7 Marine Engine Oil Cooler Core - Check/Clean/Test - Gear Oil Cooler - If Equipped
2014/06/20 A Shorter Plug Is Required on the Water Pump Group of Certain C-9 Engines {1361, 7553}
XQC1200 and XQC1600 Power Modules Water Pump - Remove and Install
C175-16 PETROLEUM ENGINES Fuel Control Valve - Remove and Install - Primary
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
XQC1200 and XQC1600 Power Modules Water Temperature Regulators - Remove and Install
Installation of the 459-5764 Engine Electronics {1901, 1920} Installation of the 459-5764 Engine Electronics {1901, 1920}
C3.4B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C3.4B Engines for Caterpillar Built Machines Alternator - Install
C3.4B Engines for Caterpillar Built Machines Alternator - Remove
C3.4B Engines for Caterpillar Built Machines Fan Drive - Remove and Install
C175-16 PETROLEUM ENGINES Fuel Pump (High Pressure) - Remove and Install
C8.7 Marine Engine Belt - Inspect
2014/06/13 New Engine Software Is Used on Certain C175 Electric Power Generation (EPG) Engines {1901, 1920}
2014/06/13 Additional Diesel Particulate Filter (DPF) Ash Service Cleaning Interval Information Is Now Used On Certain Tier 4 Interim and Tier 4 Final C7.1 - C18 Engines {108F}
797 Off-Highway Truck Manual Lowering (Powered Stairway) - Test - If Equipped
421-1011 Valve Recession Tool Group used on G3500 C, E, ; H Engines{0374, 0599, 0701, 0703, 1100} 421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
797 Off-Highway Truck Hydraulic System Hoist System - Oil Makeup - If Equipped
2014/07/03 New Accessory Drives Are Used on Certain 3500 Machine Engines {1207}
Retrofit SCR Aftertreatment Maintenance Interval Schedule
C4.4 Engines for Caterpillar Built Machines DEF Dosing Control System
2014/12/12 New Fuel Injector Rocker Arms Are Used on Certain C13 Commercial Engines {1123}
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) System