349F and 352F Excavators Machine System Specifications Caterpillar


Hydraulic Tank Mounting

Usage:

352F-VG A9J


Illustration 1g02632839
Right side view

Table 1
Specification for 425-9586 Hydraulic Tank and Mounting Gp 
Item  Qty  Part  Specification Description 
As required, use the following shims in order to compensate for the potential frame deformation. 
6 087-8909 Shim  Thickness is 0.4 mm (0.02 inch)
6 087-8907 Shim  Thickness is 1.0 mm (0.04 inch)
6 087-8906 Shim  Thickness is 2.0 mm (0.08 inch)
447-1716 Bolt  Apply red Loctite 271 to the threads. You may use Three Bond 2471 or 1305 to the threads. 
Torque to 520 ± 70 N·m (384 ± 52 lb ft).

Caterpillar Information System:

C3.4B Engines Switch Circuits - Test - Engine Oil Pressure Switch
C8.7 Marine Engines Air Inlet and Exhaust System
Required Parts for Installing Turbochargers on Certain 2007 On-Highway Truck Engines {1052, 1053} Required Parts for Installing Turbochargers on Certain 2007 On-Highway Truck Engines {1052, 1053}
390F Excavator Radiator - Remove and Install - Front
374F Excavator Camera Harness - Disconnect and Connect
374F Excavator Machine Systems BLCV and SLCV - Calibrate - If Equipped
390F Excavator Hydraulic Oil Cooler - Remove and Install - Front
390F Excavator Hydraulic Oil Cooler - Remove and Install - Rear
349F and 352F Excavators Machine System Specifications Pilot Lines
374F Excavator Leaving the Machine
390F Excavator Aftercooler - Remove and Install
390F Excavator Enclosure (Cooling System Package) - Remove and Install
C3.4B Engines Valve Position - Test
349F and 352F Excavators Machine System Specifications Air Conditioner Lines
390F Excavator Radiator - Remove and Install - Rear
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
2014/05/30 New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
G3600 A4 Engines Safety Messages
390F MHPU Mobile Hydraulic Power Unit Machine System Main Hydraulic Pump
390F MHPU Mobile Hydraulic Power Unit Machine System Relief Valve (Main)
374F Excavator Lifting and Tying Down the Machine
G3600 A4 Engines Refill Capacities
UPS 750 Uninterruptible Power Supply System Operational Modes
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.