C4.4 Marine Generator Set Caterpillar


Coolant Level Is Low

Usage:

C4.4 NRP
Use this procedure when the engine coolant level is repeatedly found to be low or any of the following diagnostic codes are active:

Table 1
Diagnostic Trouble Codes for Low Coolant Level    
J1939 Code     Code Description     Comments    
111-17     Engine Coolant Level : Low - least severe     The coolant level is low for 10 seconds with the engine running.
The ECM has been powered for at least 2 seconds.
There are no electrical faults or battery faults on the circuit.
   
111-18     Engine Coolant Level : Low - moderate severity     The coolant level is low for 10 seconds with the engine running.
The ECM has been powered for at least 2 seconds.
There are no electrical faults or battery faults on the circuit.
The engine will be derated.
   
111-1     Engine Coolant Level : Low - most severe (3)     The coolant level is low for 60 seconds with the engine not running.
The ECM has been powered for at least 2 seconds.
There are no electrical faults or battery faults on the circuit.
The engine will be derated.
   

Note: Diagnostic codes will only be present if a coolant level switch is installed.

Inspect the cooling system. Refer to Systems Operation, Testing, and Adjusting, "Cooling System - Test" for the correct procedure.

Caterpillar Information System:

C4.4 Marine Generator Set Coolant Contains Oil
C4.4 Marine Generator Set Battery Problem
C4.4 Marine Generator Set Alternator Problem
C4.4 Marine Generator Set Alternator Is Noisy
C280-08 Tier 4 Engine Centrifugal Oil Filter - Assemble
C280-08 Tier 4 Engine Centrifugal Oil Filter - Disassemble
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Centrifugal Oil Filter - Remove and Install
390F Excavator Machine Systems Check Valve (Counterweight Circuit) - Assemble
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Bucket Open Does Not Respond To Progressive Joystick Motion
C280-08 Tier 4 Engine Engine Oil Filter Housings - Assemble
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Bucket Open Does Not Function
C280-08 Tier 4 Engine Engine Oil Filter Housings - Disassemble
C4.4 Marine Generator Set Coolant Temperature Is High
C4.4 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
C4.4 Marine Generator Set Crankcase Breather Ejects Oil
C4.4 Marine Generator Set Crankcase Fumes Disposal Tube Has Oil Draining
374F and 390F Excavators Tool Control System Medium Pressure: Default Value of Work Tool Parameters
374F and 390F Excavators Tool Control System Medium Pressure: Relief Valve (Line) - Test and Adjust
374F and 390F Excavators Tool Control System Medium Pressure: Relief Valve (Main) - Test and Adjust
374F and 390F Excavators Tool Control System One-Way/Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust
C280-08 Tier 4 Engine Engine Oil Pan - Remove and Install
C280-08 Tier 4 Engine Engine Oil Pan - Disassemble
C280-08 Tier 4 Engine Engine Oil Pan - Assemble
C280-08 Tier 4 Engine Oil Temperature Regulators - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.