Battery
Show/hide table
 |
|
充电装置正在工作时，切勿从蓄电池上断开任何充电装置电路或蓄电池电路电缆。 火花可能导致来自蓄电池出口的的氢气和氧气的可燃蒸气混合气发生爆炸，这些气体是从电解液释放出来的。 可能导致人身伤害。 |
Show/hide table
| 注意 |
|---|
|
发动机随附的充电系统需要使用富液式铅酸蓄电池。 富液式铅酸蓄电池具有自由流动的电解液。 至任何其他蓄电池类型，包括阀控式密封铅酸蓄电池的直接电气连接可导致蓄电池和充电系统部件永久损坏。 |
蓄电池电路是充电器的一个电气负载。 此负载随着蓄电池的充电情况不同而变化。
Show/hide table
| 注意 |
|---|
|
如果工作过程中蓄电池与充电装置之间的连接被断开的话，充电装置将会损坏。 损坏之所以发生是因为丧失了来自蓄电池的负载，充电电压增高。 电压过高可能损坏充电装置、调压器和其它电气部件。 |
使用 4C-4911 蓄电池负荷测试仪以便测试使用时无法维持充电的蓄电池。 请参阅操作手册, SEHS9249，了解使用 4C-4911 蓄电池负荷测试仪的详细说明。 有关测试蓄电池的应采用的正确测试程序和技术规格，请参阅专门说明书, SEHS7633。
Caterpillar Information System:
CX31-P600 Petroleum Transmission Hydraulic Oil Contamination - Test
C15 and C18 On-Highway Engines Flywheel - Remove and Install
CX31-P600 Petroleum Transmission Transmission Planetary Troubleshooting
C15 and C18 On-Highway Engines Water Temperature Regulator Housing - Remove and Install
CX31-P600 Petroleum Transmission Torque Converter Troubleshooting
CX31-P600 Petroleum Transmission Visual Inspection
C280-16 Engine Alternator - Replace
2014/02/20 New Anti Drift Valves are Now Used on Certain 345D and 349D Excavators {5059}
C15 and C18 On-Highway Engines Engine Oil Pump - Remove and Install
Reuse and Salvage for Engine Dampers {1202, 1205} Reuse and Salvage for Engine Dampers {1202, 1205}
2013/11/13 A New Alternator and Alternator Bracket Have Been Introduced on Certain C4.4 and C6.6 Engines {1405, 1425}
G3500H Generator Set Engine Electric Starting System
C15 and C18 On-Highway Engines Flywheel Housing - Remove and Install - Power Take Off equipped
C15 and C18 On-Highway Engines Power Take-Off Drive Group - Assemble
C15 and C18 On-Highway Engines Crankshaft Front Seal - Remove and Install
Exhaust Leaks May Cause Failures of the 195-2431 Detonation Sensor Groups on Certain G3500 Engines{1408, 7400} Exhaust Leaks May Cause Failures of the 195-2431 Detonation Sensor Groups on Certain G3500 Engines{1408, 7400}
C15 and C18 On-Highway Engines Rocker Arm and Shaft - Remove and Install
C15 and C18 On-Highway Engines Cylinder Head - Remove and Install
C280-16 Engine Exhaust Manifold Shield - Remove and Install
3516C Marine Engine Catalyst (SCR) - Replace
Procedure for Installing the 450-6188 Solenoid Valve Gp and 450-3897 Wiring Harness on G3500 Petroleum Engines{5479} Procedure for Installing the 450-6188 Solenoid Valve Gp and 450-3897 Wiring Harness on G3500 Petroleum Engines{5479}
2013/12/19 New Software Is Used on Certain C32 Marine Engines {1901, 1920}
3516C Marine Engine Model View Illustrations
C15 and C18 On-Highway Engines Camshaft - Remove and Install