Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B Engines {1250, 1280}
- Engine:
- 3512B (S/N: PTM1-UP; YAM1-UP)
Refer to Special Instructions, REHS7866, "Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines" for more detailed information.
The Dynamic Gas Blending (DGB) upgrade kit provides a way to use gas and diesel simultaneously in a power application. DGB continuously optimizes gas substitution while maintaining diesel power and transient performance to optimize fuel savings.
The DGB automatically adjusts to changes in incoming fuel quality and pressure, allowing your engines to run on a wide variety of fuels, from associated gas to gasified Liquid Natural Gas (LNG).
Caterpillar Information System:
2013/10/17 A New Expansion Tank Assembly Is Used on Certain 3500 Marine Engines {1354}
C7.1 Industrial Engine Manifold (DEF Heater) - Remove and Install
C7.1 Industrial Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
3516C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3512E HD Petroleum Engine Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
3512C Oil Well Service Engines Declaration of Conformity
435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000} 435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000}
3516C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C} Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C}
3512E Engines for Well Stimulation Pumps Cover Group (Front Housing)
3516C Petroleum Engines Flywheel
C15 Petroleum Generator Set Engines Belt Tightener
3512C Petroleum Engines Electronic Control Module (Engine) - Remove and Install
C13 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Disassemble
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Assemble
2013/11/21 A New Jacket Water Outlet Elbow Is Used on Certain C175 Marine and Petroleum Engines {1380}
3512C Petroleum Engines Gas Pressure Regulator - Remove and Install
C7.1 Engines NOx Conversion Is Low
3512C Petroleum Engines Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
C32 Auxiliary Engine Engine Electronics
2013/07/25 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3500B and 3500C Engines {1379}
2013/07/25 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}