2013/11/21 Caterpillar


A New Jacket Water Outlet Elbow Is Used on Certain C175 Marine and Petroleum Engines {1380}

Usage:

C175-16 M6B
Engine:
C175-16 (S/N: M6B1-UP; P6L1-UP)
Engine News SEBD9912, 21 November 2013, "A New Jacket Water Outlet Elbow Is Used on Certain C175 Marine and Petroleum Engines". Disregard the previous article, the effectivity has been updated.

Description of Change: The new elbow used for the jacket water outlet has been designed to allow for improved clearance and routing of the engine wiring harness.

Adaptable To:




Illustration 1g03408205

(1) 422-2562 Elbow

(2) 335-8682 Elbow


The new 422-2562 Elbow replaces the previous 335-8682 Elbow in the jacket water system. This change is adaptable back to first production on the serial numbers listed above. Table 1 contains the effective serial numbers.

Table 1
Sales Model     Effective Serial Number    
C175     S/N:P6L1036-UP    
S/N:M6B1005-UP

Caterpillar Information System:

C7.1 Industrial Engine Diesel Exhaust Fluid Module - Assemble
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
C13 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
3512C Petroleum Engines Electronic Control Module (Engine) - Remove and Install
2014/01/17 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B Engines {1250, 1280}
2013/10/17 A New Expansion Tank Assembly Is Used on Certain 3500 Marine Engines {1354}
C7.1 Industrial Engine Manifold (DEF Heater) - Remove and Install
C7.1 Industrial Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
3516C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3512E HD Petroleum Engine Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
3512C Oil Well Service Engines Declaration of Conformity
3512C Petroleum Engines Gas Pressure Regulator - Remove and Install
C7.1 Engines NOx Conversion Is Low
3512C Petroleum Engines Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
C32 Auxiliary Engine Engine Electronics
2013/07/25 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3500B and 3500C Engines {1379}
2013/07/25 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
349F and 352F Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
349F and 352F Excavators Hydraulic System Relief Valve (Main) - Heavy Lift
349F and 352F Excavators Machine System Control Valve (Boom Lowering)
2013/07/30 Delphi Fuel Injection Pumps on 3054, 3056, 3054B, 3054C, C3.3, C4.4 (MECH), and C7.1 (MECH)Engines {1251}
349F and 352F Excavators Machine System Control Valve (Stick Lowering)
2013/07/22 New Bolts and Washers Are Used in Certain 3500 Engines With Oil Scavenge Pumps {1312, 7553}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.