Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1).
Show/hide table
Illustration 2 g03408609 - Remove bolts (2) and fuel control actuator (3).
Show/hide table
| |
| Illustration 1 | g03408533 |
- Install fuel control actuator (3) in the reverse order of removal.
Caterpillar Information System:
C7.1 Engines NOx Conversion Is Low
3512C Petroleum Engines Gas Pressure Regulator - Remove and Install
2013/11/21 A New Jacket Water Outlet Elbow Is Used on Certain C175 Marine and Petroleum Engines {1380}
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Assemble
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
C13 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
3512C Petroleum Engines Electronic Control Module (Engine) - Remove and Install
2014/01/17 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B Engines {1250, 1280}
2013/10/17 A New Expansion Tank Assembly Is Used on Certain 3500 Marine Engines {1354}
C7.1 Industrial Engine Manifold (DEF Heater) - Remove and Install
C7.1 Industrial Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
C32 Auxiliary Engine Engine Electronics
2013/07/25 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3500B and 3500C Engines {1379}
2013/07/25 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
349F and 352F Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
349F and 352F Excavators Hydraulic System Relief Valve (Main) - Heavy Lift
349F and 352F Excavators Machine System Control Valve (Boom Lowering)
2013/07/30 Delphi Fuel Injection Pumps on 3054, 3056, 3054B, 3054C, C3.3, C4.4 (MECH), and C7.1 (MECH)Engines {1251}
349F and 352F Excavators Machine System Control Valve (Stick Lowering)
2013/07/22 New Bolts and Washers Are Used in Certain 3500 Engines With Oil Scavenge Pumps {1312, 7553}
3512E Petroleum Engines Turbocharger - Remove and Install
C32 Marine Engine Maintenance Interval Schedule
349F and 352F Excavators Hydraulic System Swing Motor